{"product_id":"high-pressure-fuel-injector-hose-aramid-11-5mm-id-x-18-5mm-od-x-250mm","title":"High Pressure Fuel Injector Hose German-Made Ethanol-Resistant 11.5mm ID x 18.5mm OD x 250mm Length","description":"\u003ch3\u003eGerman-Manufactured Aramid-Braided Fuel Hose — 11.5mm ID, Sold Per 250mm\u003c\/h3\u003e\n\u003cp\u003eThe same hose used in aerospace and aviation applications. This German-manufactured aramid-braided fuel hose is the only correct replacement for polyester-reinforced hoses on classic and modern fuel-injected engines. 100% ethanol-resistant and fully compatible with E10, bio-diesel (RME), and all commercially available fuels. This size is used for feed and return pipework and around where the pump meets the tank.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e⚠️ Why You Must Replace Your Old Fuel Hoses Now\u003c\/h4\u003e\n\u003cp\u003eUK fuel now contains up to 10% ethanol. Older polyester-reinforced hoses are not ethanol-resistant — they degrade from the inside out, becoming brittle and prone to cracking. A leaking fuel hose near a hot engine is a fire risk.\u003c\/p\u003e\n\u003cp\u003eDon’t just replace the injector hoses — check and replace \u003cstrong\u003eall\u003c\/strong\u003e hoses from the tank to the feed and return lines.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eConstruction\u003c\/h4\u003e\n\u003cp\u003eMulti-layer design engineered for high-pressure fuel systems:\u003c\/p\u003e\n\u003cp\u003e· FPM (fluoro elastomer) rubber inner tube — chemical resistance and high-temperature performance\u003c\/p\u003e\n\u003cp\u003e· ECO (epichlorohydrin) rubber intermediate layer — oil resistance and heat stability\u003c\/p\u003e\n\u003cp\u003e· Braided aramid fibre reinforcement — exceptional tensile strength, pressure resistance and flexibility\u003c\/p\u003e\n\u003cp\u003e· ECO rubber outer cover — resistance to weathering, ozone and oils\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cp\u003e· Internal diameter: 11.5mm | External diameter: 18.5mm\u003c\/p\u003e\n\u003cp\u003e· Working pressure: 10 bar | Bursting pressure: 50 bar | Testing pressure: 20 bar\u003c\/p\u003e\n\u003cp\u003e· Minimum bending radius: 80mm\u003c\/p\u003e\n\u003cp\u003e· Temperature range: -40°C to +125°C (up to +150°C for short periods)\u003c\/p\u003e\n\u003cp\u003e· Meets multiple international standards: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007, VW TL 524 24 — providing superior resistance to degradation and fuel permeation compared to standard hoses\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eSold Per 250mm\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis hose is sold in lengths of 250mm due to its cost. If you require 500mm, increase the quantity to 2, and so on.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe also offer a hose make-up service for these pipes, including swaging new ferrules. Please contact us for prices.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eComplete the Kit\u003c\/h4\u003e\n\u003cp\u003e· \u003ca href=\"\/fi\/products\/7199681511497\"\u003e18-20mm High Pressure Fuel Hose Clips — the correct clip size for this hose (10 Pack)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAlso Available In\u003c\/h4\u003e\n\u003cp\u003eWe stock this hose in three sizes to allow you to replace all hoses around the engine, including feed and return lines:\u003c\/p\u003e\n\u003cp\u003e· \u003ca href=\"\/fi\/products\/high-pressure-fuel-injector-hose-aramid-7-3mm-id-x-13-5mm-od-x-1-metre\"\u003e7.3mm ID x 13.5mm OD — sold per 1 metre (used in all overhaul kits)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e· \u003ca href=\"\/fi\/products\/high-pressure-fuel-injector-hose-aramid-9-3mm-id-x-15-3mm-od-x-0-5mtr\"\u003e9.3mm ID x 15.3mm OD — sold per 0.5 metre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025900023881,"sku":"11.5mm id hose","price":15.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_b1aa103a-18fa-4622-9e15-10c330ac59fc.jpg?v=1668183472","url":"https:\/\/www.mrinjectoruk.co.uk\/fi\/products\/high-pressure-fuel-injector-hose-aramid-11-5mm-id-x-18-5mm-od-x-250mm","provider":"Mr Injector UK - Petrol Injector Servicing \u0026 Diagnostics","version":"1.0","type":"link"}