PETROL TEST FACILITY, NO DIESEL

1 1

Overhaul Kit For Alfa Romeo Spider 1990-1994 With Bosch 0280150764 Hose Injectors - Kit 84

Overhaul Kit For Alfa Romeo Spider 1990-1994 With Bosch 0280150764 Hose Injectors - Kit 84

44 i lager

£35.86 GBP
£35.86 GBP
Rea Slutsåld
Frakt beräknas i kassan.

Hose & Ferrule Kit for Bosch 0280150764 Injectors in Alfa Romeo Spider 1990–1994 – Kit 84

Kit 84 is designed for 1990½–1994 Series 4 four-cylinder Alfa Romeo Spider models fitted with Bosch 0280150764 hose injectors. Check the number on your injectors before ordering to confirm fitment.

Its ethanol-resistant fuel hose lets you upgrade older polyester-reinforced injector hoses, helping futureproof your classic car as ethanol content in petrol rises and fuel blends change.

Check the injector connection before ordering: the kit includes 8 ferrules for its 4 hose sections. Confirm that your original injector setup matches this ferrule arrangement. Hose clips are not included.

What’s included

  • 4 × 52mm ethanol-resistant fuel hose sections
  • 8 × hose ferrules
  • 4 × mid-body seals
  • 4 × injector filter baskets
  • 4 × pintle caps
  • 4 × inlet manifold seals
  • Illustrated instruction sheets

Fuel Hose specifications

  • Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid-fibre reinforcement and ECO rubber outer cover
  • Working pressure: 10 bar
  • Burst pressure: 50 bar
  • Temperature range: −40°C to +125°C (up to +150°C for short periods)
  • Standards listed: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007 and VW TL 524 24
  • Fuel compatibility: Ethanol-resistant and suitable for E10, biodiesel (RME) and commercially available fuels

Before you order

  • Confirm your injectors are Bosch 0280150764 and fitted to a 1990½–1994 Series 4 four-cylinder Alfa Romeo Spider.
  • Hose clips and injectors are not included.
  • Any injector shown is for identification only.

⚠️ Why you should check your old fuel hoses

UK fuel can contain up to 10% ethanol. Older polyester-reinforced fuel hoses can degrade over time, becoming hard, brittle or cracked. Leaks can occur, risking an engine fire. At the same time as replacing the injector hoses, it is advised to check the fuel feed and return lines and any other hoses around the engine, and replace any that are aged, cracked, hard, or unsuitable for current fuel.

All kits and parts orders dispatched by Master Injector UK.

Visa alla uppgifter

⚠️ Petrol Compatibility & Injector Handling Notice

Petrol Only: Strictly for petrol engines, not diesel. Check compatibility before buying.

Delicate Mechanisms: Injectors—especially historic hose injectors—are fragile. Some components cannot be removed, replaced, or obtained anywhere. Check our kits before dismantling your own parts; some items are not available aftermarket. Do not force components loose or strip your injectors down until you know what we can replace, or the injector may need replacing.

Expert Fitment Advised: We strongly advise using a competent professional for installation to avoid common issues like over-tightening hose clamps or damaging pintle needles. If you are unsure about dismantling, fitting or refitting an injector, seek advice from a competent professional before proceeding.

Lubrication: The only lubricant we recommend is a light smear of clean engine oil, wiped almost completely off before fitting.