{"title":"Ford DiSi","description":"\u003cp data-mce-fragment=\"1\"\u003eMr Injector UK has been working in petrol injector diagnostics and restoration for the past 30 years. We are one of the oldest Asnu test facilities.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur top of the range Asnu machines allow us to test and service top feed standard port, high pressure (GDI, HPI etc), Siemens \/ Bosch Piezo and side feed petrol injectors.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg height=\"215\" width=\"145\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/testing2_480x480.png?v=1674548855\" style=\"display: block; margin-left: auto; margin-right: auto;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/testing2_480x480.png?v=1674548855\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYour injectors are pre-cleaned, inductance load tested and run on a test rig as they would operate on your engine to check for any anomalies, we record this pre-service information on your report sheet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll parts are removed then we ultrasonically clean and backflush before returning to the ASNU test bench for dynamic analysis, which includes spray pattern checks, leak off and dynamic balance checks.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf they are metal-bodied EV1\/Weber\/Lucas type injectors, they would also be stripped of paint and rust, etched and hot bake painted in heat resistant paint. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAfter the service, new parts are installed where applicable and the report is sent across to you with the findings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe result is a beautifully cleaned and balanced set of injectors with restored flows and brand-new parts, ready to reinstall straight back into the vehicle. \u003c\/p\u003e","products":[{"product_id":"ford-disi-injector-service","title":"Ford DiSi Fuel Injector Service","description":"\u003cp\u003eMr Injector UK has been working in injector diagnostics and restoration for over 30 years. We are one of the oldest Asnu test facilities.\u003c\/p\u003e\n\u003cp\u003eOur GDI FSI machine has the capacity to test all manufactured high-pressure injectors from various manufacturers such as Mitsubishi, Bosch, Delphi and Magneti Marelli.\u003c\/p\u003e\n\u003cp\u003eWe can inductance test over 8000 pulses, perform static and dynamic flow checks and atomisation analysis to check droplet and directional spray patterns.\u003c\/p\u003e\n\u003cp\u003eThis service is for high pressure (GDI\/FSI\/TFSI etc) injectors that are working and not seized. This does not include hose to rail injectors, standard port injectors, side feed injectors or Siemens\/Bosch Piezo injectors, these are listed separately.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/HighpressureGDIBA2_480x480.png?v=1670260852\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour injectors are pre-cleaned, inductance load tested and run on a test rig as they would operate on your engine to check for any anomalies, we record this pre-service information on your report sheet.\u003c\/p\u003e\n\u003cp\u003eAll parts are removed then we ultrasonically clean and backflush before returning to the ASNU test bench for dynamic analysis, which includes spray pattern checks, leak off and dynamic balance checks.\u003c\/p\u003e\n\u003cp\u003eAfter the test and service all new parts are installed where applicable and the report would be drafted and sent across to you with the findings.\u003c\/p\u003e\n\u003cp\u003eHigh pressure injectors are very expensive; this service will allow you to properly diagnose which injectors are the problem injectors. We shall be able to see if they are serviceable thus saving you having to purchase new ones. If we can't service all your injectors, you only pay for the ones that are serviceable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll services show as 'sold out' to avoid them being booked through the website - please email your serial numbers to mrinjectorukware@gmail.com for a quote. All services available to UK residents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GDI FSI type injector analysis and service","offers":[{"title":"Default Title","offer_id":40025873154121,"sku":"","price":30.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_53ace8c8-f4cb-413a-88fc-50471924c1a2.jpg?v=1656036562"},{"product_id":"teflon-nylon-bush-for-gdi-injectors","title":"Teflon Nylon Bush Set For High Pressure GDI FSI TFSI Siemens Piezo \u0026 Bosch Piezo Injectors - Kit 161","description":"\u003cp\u003eTeflon Nylon bush kit designed for Bosch 0261500 series injectors fitted to many makes including VW, Audi, Seat, and Ford.\u003c\/p\u003e\n\u003cp\u003eAlso suitable for Marelli injectors and Siemens Piezo Mercedes \/ BMW injectors 10181010 13537565137 13537589048.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 161 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Lower seal bushes\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePlease note: A tool is required to swage these bushes onto the pintle shaft of the injector.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025914474569,"sku":"kit 161","price":8.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_161_new.png?v=1751203898"},{"product_id":"teflon-nylon-bush-for-gdi-injectors-6-cylinder","title":"Teflon Nylon Bush Set For High Pressure GDI FSI TFSI Siemens Piezo \u0026 Bosch Piezo Injectors - Kit 162","description":"\u003cp\u003eTeflon Nylon bush kit designed for Bosch 0261500 series injectors fitted to many makes including VW, Audi, Seat and Ford.\u003c\/p\u003e\n\u003cp\u003eAlso suitable for Marelli injectors and Siemens Piezo Mercedes \/ BMW injectors 10181010 13537565137 13537589048.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents \u003c\/h4\u003e\n\u003cp\u003eSeal Kit 162 contains:\u003c\/p\u003e\n\u003cp\u003e6 x Lower seal bushes\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePlease note: An installation tool is required to swage the bushes onto the pintle shaft of the injector.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025914540105,"sku":"kit 162","price":12.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_162_new_79e418e0-36e4-4d1d-96ce-03afa9f3fe08.png?v=1751208980"},{"product_id":"injector-seal-bush-filter-kit-159-for-bosch-marelli-htc-gdi-injectors","title":"Bosch Marelli Compatible Injector Seal Bush \u0026 Filter Kit For Bosch Marelli HTC GDI Injectors - Kit 159","description":"\u003cp\u003eService kit for Bosch 0261500 series injectors fitted to VW, Audi, Seat, Ford, Marelli and HTC injectors.\u003c\/p\u003e\n\u003cp\u003eThe kit contains our upgraded filter baskets, rail seals and Teflon bushes for 8 injectors.\u003c\/p\u003e\n\u003cp\u003eThe upper seals are made of \u003cstrong\u003eViton, with higher rating hardness\u003c\/strong\u003e than standard port injectors' seals - 95shA - to deal with the higher pressure.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan color=\"#000000\"\u003eWe now include our \u003cstrong\u003enew all-metal, free-flowing filter baskets in all high-pressure seal kits\u003c\/strong\u003e. The original fitted filters seem to dissolve, including the plastic cage, causing serious injector blockage, we think due to fuel additives and the extremely high pressure. Unfortunately, if left, the particles of the previously installed filters are then pushed down inside the injector pintle causing issues with flow or even blocking flow completely. Fortunately, if changed early enough you can stop this happening by replacing them with our all-metal, free-flowing filters. These are great to use with Ethanol and Methanol fuel types as they have no reaction to alcohol.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require the 14.5mm top seal\u003c\/strong\u003e as some newer injectors require a smaller 13mm outer diameter seal. If you require the smaller top seal, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e \u003ca title=\"parts kit for high pressure GDI injectors requiring 13mm rail seal\" href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/seal-bush-kit-for-bosch-0261500-injectors-later-series-13mm-seals-8-cylinder?_pos=5\u0026amp;_psq=13mm\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003e\u003cimg height=\"220\" width=\"220\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_156_new_78311b02-8b83-4a7c-b3f7-1b9139b6ac94.png?v=1751213994\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eThe Kit 160 contains:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e8 x \u003cstrong\u003eUpgraded all-metal filter baskets to prevent future dissolving - \u003cspan style=\"text-decoration: underline;\"\u003eplastic filters should be avoided when possible when changing the filters in this type of injector\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8 x Teflon bushes\u003c\/p\u003e\n\u003cp\u003e8 x Top Seals 95 Shore Rated\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePlease note: The bushes will require a tool to install them onto the pintle shafts,\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025914638409,"sku":"kit 159","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_159_new_625a9961-0891-43a9-b315-2c0ab3bfe8a3.png?v=1751216004"},{"product_id":"bosch-0261500-series-injector-seal-bush-set-kit-115","title":"Seal \u0026 Bush Kit for Bosch 0261500 GDI TSI TFSI Injectors 4 cylinders  - Kit 115","description":"\u003cp data-mce-fragment=\"1\"\u003eParts kit for TFSi FSi Bosch injectors ref: 0261500 series, these injectors were fitted to many  makes:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBMW\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlfa\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAudi\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMini\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSeat\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eVW\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFord and more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe upper seals are made of Viton with a higher rated hardness (Shore Rating) than standard port injector seals - 95shA - to deal with the higher pressure.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe also stock kits containing the filter baskets and spacers if required, please search for 'GDI' in the search bar.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eContents\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSeal Kit 115 contains:\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e4 x High pressure fuel rail seals\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e4 x Pintle Teflon bushes\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTerms\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE NOTE: The lower bushes will require a bush installation tool to correctly apply them onto the pintle shafts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Bosch number is for identification purposes to illustrate compatibility. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025915261001,"sku":"kit 115","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_115_new.png?v=1751215625"},{"product_id":"bosch-0261500-series-injector-seal-filters-bush-set-kit-160","title":"Fuel Injector Filter, Seal \u0026 Teflon Bush Set For Bosch 0261500 Original Injectors 4 Cylinder - Kit 160","description":"\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/span\u003eFuel injector parts kit containing filters, rail seals and Teflon bushes for 4 cylinder TFSi FSi Ford, Alfa, Volkswagen, BMW, Seat, Audi, Mini and more fitted with early Bosch injector 0261500 series, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500020 or 06F906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500037 or 06F906036F\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500073 or 13537591623\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500005 or 036906036\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500009 or 2S7G 9F593 AB or 1225303\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500016 or 03C906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500014 or 06F906036 and many more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese injectors were used in various makes and models, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORD\u003c\/strong\u003e Mondeo III - engines B5Y, B4Y - Saloon, B5Y - Estate, 1.8 SCi\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI \/ VOLKSWAGEN \/ SEAT\u003c\/strong\u003e engines:\u003c\/p\u003e\n\u003cp\u003eAPR, AXU, BAD, BVX, BVZ, BYD, CCTA, CCZA, CDLA, CDLB, CDLC, CDLD, CDLF, CDLG, CDLH, CDLJ, CDLK, CDMA, CRZA, CULC,  BAD, APR, AXU, CDAA, CDHA, CDHB, CJEB, CFBA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVW\u003c\/strong\u003e Bora \/ Eos \/ Golf \/ Lupo \/ Passat \/ Polo \/ Scirocco \/ EOS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSEAT\u003c\/strong\u003e  Exeo \/ Leon \/ Toledo \/ Altea - \u003cspan style=\"font-size: 0.875rem;\"\u003eengines - BWA, BWA1, BWE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI\u003c\/strong\u003e A1 \/ A2 - engine BAD \/ A3 - engines BLF, BLN, BLP \/ TT\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBMW\u003c\/strong\u003e 1 Series \/ 3 Series - Engines - N13 B16 A, N14 B16 A, N14 B16 C, N16 B16 A, N18 B16 A, N18 B16 C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMINI\u003c\/strong\u003e Clubman \/ Countryman \/ Convertible \/ Cooper (S) (JSW) \/ Coupe \/ Paceman \/ Roadster\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require the 14.5mm top seal\u003c\/strong\u003e as some newer injectors require a smaller 13mm outer diameter seal. If you require the smaller top seal, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/seal-bush-kit-for-bosch-0261500-injectors-late-series-13mm-seals-kit-152?pr_prod_strat=collection_fallback\u0026amp;pr_rec_id=c7208e15f\u0026amp;pr_rec_pid=6777894928457\u0026amp;pr_ref_pid=15175420084602\u0026amp;pr_seq=uniform\" title=\"GDI parts kit for high pressure injectors featuring top 13mm seals and Teflon bushes\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_152_new_5babf18c-52ee-4c39-860c-31ee112013e2.png?v=1750964929\" alt=\"\" width=\"246\" height=\"246\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe upper seals are made of \u003cstrong\u003eViton, with higher rating hardness\u003c\/strong\u003e than standard port injectors' seals - 95shA - to deal with the higher pressure. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan color=\"#000000\"\u003eWe now include our \u003cstrong\u003enew all-metal, free-flowing filter baskets in all high-pressure seal kits\u003c\/strong\u003e. The original fitted filters seem to dissolve, including the plastic cage, causing serious injector blockage, we think due to fuel additives and the extremely high pressure. Unfortunately, if left, the particles of the previously installed filters are then pushed down inside the injector pintle causing issues with flow or even blocking flow completely. Fortunately, if changed early enough you can stop this happening by replacing them with our all-metal, free-flowing filters. These are great to use with Ethanol and Methanol fuel types as they have no reaction to alcohol.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eThe Kit 160 contains:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e4 x \u003cstrong\u003eUpgraded all-metal filter baskets to prevent future dissolving - \u003cspan style=\"text-decoration: underline;\"\u003eplastic filters should be avoided when possible when changing the filters in this type of injector\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4 x Viton 95 Shore rated upper rail seals\u003c\/p\u003e\n\u003cp\u003e4 x Lower Teflon bushes - these require changing every time you remove the injectors from the engine.\u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cspan color=\"#000000\"\u003eTerms\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003ePLEASE NOTE: The lower bushes will require a tool to install them onto the pintle shafts.\u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specifications of what was originally installed on your injectors in material and design. These are not Bosch products. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025915359305,"sku":"kit 160","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_160_new2_d38d7ab2-7152-49ef-b9ba-0a92f0bc504d.png?v=1751030416"},{"product_id":"seal-bush-kit-for-bosch-0261500-injectors-late-series-13mm-seals-kit-152","title":"Seal \u0026 Bush Kit for Bosch 0261500 GDI Late Series Injectors with 13mm Rail Seals 4 Cylinders - Kit 152","description":"\u003cp\u003eThis kit was designed for later series Bosch 0261500 and equivalent TFSi FSi injectors that require smaller 13mm rail seals than the original GDI injectors, these have fitments in Ford, Audi, Skoda, Seat, Jaguar, VW, Kia, Alfa and more.\u003c\/p\u003e\n\u003cp\u003eThis parts kit for 4 cylinders contains the top seals and Teflon bushes to enable you to refurbish your injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe upper seals are Viton with higher rating hardness than standard port injectors of 90shA to deal with the higher pressure.\u003c\/p\u003e\n\u003cp\u003eThe following are some of the injectors compatible with this kit but \u003cem\u003ethis is not an exhaustive list:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e06H906036H\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \u0026amp; \u003cstrong\u003eVW\u003c\/strong\u003e Golf \/ Polo \/ Passat\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500092 or 16600 1KC0A\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cerato Koup \/ Sportage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500100 or 35310 2B110, 35310 2B130\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cee'd \/ Sportage \/ Soul \u0026amp; \u003cstrong\u003eHyundai\u003c\/strong\u003e i30 \/ i35 \/ i40 \/ Veloster\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500103 or BM5G9F593BA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Focus \/ Galaxy \/ Mondeo \/ S-Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500123 or 06K906036\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp;\u003cstrong\u003e Seat \u003c\/strong\u003eLeon \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500155 or CJ5G9F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Fiesta \/ Focus \/ Galaxy \/ Kuga \/ Mondeo \/ S-Max \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500160 or 06H906036Q\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500162 or 06H906036P\u003c\/strong\u003e - fitments in \u003cstrong\u003eVW\u003c\/strong\u003e Amarok \/ Beetle \/ Eos \/ Golf \/ Jetta \/ Multivan \/ Passat \/ Scirocco \/ Sharan \/ Tiguan \/ Transporter \u0026amp;\u003cstrong\u003e Audi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ A6 \/ A8 \/ Q3 \/ Q5 \/ TT\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500220 or DM5G9F593AA \u003c\/strong\u003e- fitments in \u003cstrong\u003eFord\u003c\/strong\u003e B-Max \/ C-Max \/ Ecosport \/ Fiesta \/ Focus \/ Grand \/ Mondeo \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500296 or DX239F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eJaguar\u003c\/strong\u003e F-Pace \/ F-Type \/ XE \/ XF \/ XJ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500354 or 04E906036E or 04E906036Q or 0261500355 or 0261500248\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500477 or 04E906036AF\u003c\/strong\u003e - fitments in\u003cstrong\u003e Skoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti \u0026amp; \u003cstrong\u003eSeat\u003c\/strong\u003e Leon \/ Ibiza \u0026amp; \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp;\u003cstrong\u003e VW\u003c\/strong\u003e Beetle \/ Caddy \/ CC \/ Golf \/ Jetta \/ Passat \/ Polo \/ Scirocco \/ Tiguan \/ Touran\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500556 or DM5G9F593AB\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e Fiesta \/ Focus \/ B-Max \/ C-Max \/ Ecosport \/ Mondeo \/ Transit \/ Tourneo Connect\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require a 13mm top seal and not the 14.5mm ones\u003c\/strong\u003e, if you require 14.5mm top seals, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/fuel-injector-seal-filter-teflon-bush-set-for-bosch-0261500-original-injectors-4-cylinder-kit-160-copy?_pos=1\u0026amp;_psq=204\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"parts kit for GDI injectors featuring filter baskets, spacers, seals and decoupling elements\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_204_B_921b4d06-036a-4b90-a9d9-3ee8fcabe552.png?v=1751031346\" alt=\"\" width=\"220\" height=\"220\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cp\u003eSeal Kit 152 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Upper rail seals 13mm\u003c\/p\u003e\n\u003cp\u003e4 x Lower pintle bushes - these Teflon bushes should be changed every time the injectors are removed from the engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTerms\u003c\/p\u003e\n\u003cp\u003eWe have other cylinder sizes available - search '13mm' to view them all.\u003c\/p\u003e\n\u003cp\u003ePlease note: The lower bushes will require a special tool to install them onto the pintle shaft.\u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specification of originally installed parts at manufacture. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025916407881,"sku":"kit 152","price":15.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_152_new_5babf18c-52ee-4c39-860c-31ee112013e2.png?v=1750964929"},{"product_id":"seal-bush-kit-for-bosch-0261500-injectors-late-series-13mm-seals-6-cylinder","title":"Seal \u0026 Bush Kit for Bosch 0261500 GDI Late Series Injectors with 13mm Rail Seals 6 Cylinders - Kit 155","description":"\u003cp\u003eThis kit was designed for later series Bosch 0261500 and equivalent TFSi FSi injectors that require smaller 13mm rail seals than the original GDI injectors, these have fitments in Ford, Audi, Skoda, Seat, Jaguar, VW, Kia, Alfa and more.\u003c\/p\u003e\n\u003cp\u003eThis parts kit for 6 cylinders contains the top seals and Teflon bushes to enable you to refurbish your injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe upper seals are Viton with higher rating hardness than standard port injectors of 90shA to deal with the higher pressure.\u003c\/p\u003e\n\u003cp\u003eThe following are some of the injectors compatible with this kit but \u003cem\u003ethis is not an exhaustive list:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e06H906036H\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \u0026amp; \u003cstrong\u003eVW\u003c\/strong\u003e Golf \/ Polo \/ Passat\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500092 or 16600 1KC0A\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cerato Koup \/ Sportage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500100 or 35310 2B110, 35310 2B130\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cee'd \/ Sportage \/ Soul \u0026amp; \u003cstrong\u003eHyundai\u003c\/strong\u003e i30 \/ i35 \/ i40 \/ Veloster\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500103 or BM5G9F593BA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Focus \/ Galaxy \/ Mondeo \/ S-Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500123 or 06K906036\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp;\u003cstrong\u003e Seat \u003c\/strong\u003eLeon \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500155 or CJ5G9F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Fiesta \/ Focus \/ Galaxy \/ Kuga \/ Mondeo \/ S-Max \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500160 or 06H906036Q\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500162 or 06H906036P\u003c\/strong\u003e - fitments in \u003cstrong\u003eVW\u003c\/strong\u003e Amarok \/ Beetle \/ Eos \/ Golf \/ Jetta \/ Multivan \/ Passat \/ Scirocco \/ Sharan \/ Tiguan \/ Transporter \u0026amp;\u003cstrong\u003e Audi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ A6 \/ A8 \/ Q3 \/ Q5 \/ TT\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500220 or DM5G9F593AA \u003c\/strong\u003e- fitments in \u003cstrong\u003eFord\u003c\/strong\u003e B-Max \/ C-Max \/ Ecosport \/ Fiesta \/ Focus \/ Grand \/ Mondeo \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500296 or DX239F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eJaguar\u003c\/strong\u003e F-Pace \/ F-Type \/ XE \/ XF \/ XJ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500354 or 04E906036E or 04E906036Q or 0261500355 or 0261500248\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500477 or 04E906036AF\u003c\/strong\u003e - fitments in\u003cstrong\u003e Skoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti \u0026amp; \u003cstrong\u003eSeat\u003c\/strong\u003e Leon \/ Ibiza \u0026amp; \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp;\u003cstrong\u003e VW\u003c\/strong\u003e Beetle \/ Caddy \/ CC \/ Golf \/ Jetta \/ Passat \/ Polo \/ Scirocco \/ Tiguan \/ Touran\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500556 or DM5G9F593AB\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e Fiesta \/ Focus \/ B-Max \/ C-Max \/ Ecosport \/ Mondeo \/ Transit \/ Tourneo Connect\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require a 13mm top seal and not the 14.5mm ones\u003c\/strong\u003e, if you require 14.5mm top seals, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/fuel-injector-seal-filter-teflon-bush-set-for-bosch-0261500-original-injectors-4-cylinder-kit-160-copy?_pos=1\u0026amp;_psq=204\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"parts kit for GDI injectors featuring filter baskets, spacers, seals and decoupling elements\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_204_B_921b4d06-036a-4b90-a9d9-3ee8fcabe552.png?v=1751031346\" alt=\"\" width=\"262\" height=\"262\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cp\u003eSeal Kit 155 contains:\u003c\/p\u003e\n\u003cp\u003e6 x Upper rail seals 13mm\u003c\/p\u003e\n\u003cp\u003e6 x Lower pintle bushes - these Teflon bushes should be changed every time the injectors are removed from the engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTerms\u003c\/p\u003e\n\u003cp\u003eWe have other cylinder sizes available - search '13mm' to view them all.\u003c\/p\u003e\n\u003cp\u003ePlease note: The lower bushes will require a special tool to install them onto the pintle shaft.\u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specification of originally installed parts at manufacture. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025916506185,"sku":"kit 155","price":23.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_155_new.png?v=1750967153"},{"product_id":"seal-bush-kit-for-bosch-0261500-injectors-later-series-13mm-seals-8-cylinder","title":"Seal \u0026 Bush Kit for Bosch 0261500 GDI Late Series Injectors with 13mm Rail Seals 8 Cylinders- Kit 156","description":"\u003cp\u003eThis kit was designed for later series Bosch 0261500 and equivalent TFSi FSi injectors that require smaller 13mm rail seals than the original GDI injectors, these have fitments in Ford, Audi, Skoda, Seat, Jaguar, VW, Kia, Alfa and more.\u003c\/p\u003e\n\u003cp\u003eThis parts kit for 8 cylinders contains the top seals and Teflon bushes to enable you to refurbish your injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe upper seals are Viton with higher rating hardness than standard port injectors of 90shA to deal with the higher pressure.\u003c\/p\u003e\n\u003cp\u003eThe following are some of the injectors compatible with this kit but \u003cem\u003ethis is not an exhaustive list:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e06H906036H\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \u0026amp; \u003cstrong\u003eVW\u003c\/strong\u003e Golf \/ Polo \/ Passat\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500092 or 16600 1KC0A\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cerato Koup \/ Sportage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500100 or 35310 2B110, 35310 2B130\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cee'd \/ Sportage \/ Soul \u0026amp; \u003cstrong\u003eHyundai\u003c\/strong\u003e i30 \/ i35 \/ i40 \/ Veloster\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500103 or BM5G9F593BA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Focus \/ Galaxy \/ Mondeo \/ S-Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500123 or 06K906036\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp;\u003cstrong\u003e Seat \u003c\/strong\u003eLeon \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500155 or CJ5G9F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Fiesta \/ Focus \/ Galaxy \/ Kuga \/ Mondeo \/ S-Max \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500160 or 06H906036Q\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500162 or 06H906036P\u003c\/strong\u003e - fitments in \u003cstrong\u003eVW\u003c\/strong\u003e Amarok \/ Beetle \/ Eos \/ Golf \/ Jetta \/ Multivan \/ Passat \/ Scirocco \/ Sharan \/ Tiguan \/ Transporter \u0026amp;\u003cstrong\u003e Audi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ A6 \/ A8 \/ Q3 \/ Q5 \/ TT\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500220 or DM5G9F593AA \u003c\/strong\u003e- fitments in \u003cstrong\u003eFord\u003c\/strong\u003e B-Max \/ C-Max \/ Ecosport \/ Fiesta \/ Focus \/ Grand \/ Mondeo \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500296 or DX239F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eJaguar\u003c\/strong\u003e F-Pace \/ F-Type \/ XE \/ XF \/ XJ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500354 or 04E906036E or 04E906036Q or 0261500355 or 0261500248\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500477 or 04E906036AF\u003c\/strong\u003e - fitments in\u003cstrong\u003e Skoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti \u0026amp; \u003cstrong\u003eSeat\u003c\/strong\u003e Leon \/ Ibiza \u0026amp; \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp;\u003cstrong\u003e VW\u003c\/strong\u003e Beetle \/ Caddy \/ CC \/ Golf \/ Jetta \/ Passat \/ Polo \/ Scirocco \/ Tiguan \/ Touran\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500556 or DM5G9F593AB\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e Fiesta \/ Focus \/ B-Max \/ C-Max \/ Ecosport \/ Mondeo \/ Transit \/ Tourneo Connect\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require a 13mm top seal and not the 14.5mm ones\u003c\/strong\u003e, if you require 14.5mm top seals, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/fuel-injector-seal-filter-teflon-bush-set-for-bosch-0261500-original-injectors-4-cylinder-kit-160-copy?_pos=1\u0026amp;_psq=204\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"parts kit for GDI injectors featuring filter baskets, spacers, seals and decoupling elements\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_204_B_921b4d06-036a-4b90-a9d9-3ee8fcabe552.png?v=1751031346\" alt=\"\" width=\"249\" height=\"249\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cp\u003eSeal Kit 156 contains:\u003c\/p\u003e\n\u003cp\u003e8 x Upper rail seals 13mm\u003c\/p\u003e\n\u003cp\u003e8 x Lower pintle bushes - these Teflon bushes should be changed every time the injectors are removed from the engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTerms\u003c\/p\u003e\n\u003cp\u003eWe have other cylinder sizes available - search '13mm' to view them all.\u003c\/p\u003e\n\u003cp\u003ePlease note: The lower bushes will require a special tool to install them onto the pintle shaft.\u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specification of originally installed parts at manufacture. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025916637257,"sku":"kit 156","price":30.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_156_new.png?v=1750968757"},{"product_id":"fuel-injector-seal-filter-teflon-bush-set-for-bosch-0261500-original-injectors-4-cylinder-kit-160-copy","title":"Fuel Injector Seal \u0026 Parts Set Including Claw Clips For Bosch 0261500 Original Injectors 4 Cylinder - Kit 204","description":"\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003eFuel injector parts kit containing filters, rail seals, spacers, Teflon bushes and claw clips for 4 cylinder TFSi FSi in Ford, Alfa, Volkswagen, BMW, Seat, Audi, Mini and more fitted with early Bosch injector 0261500 series, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500020 or 06F906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500037 or 06F906036F\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500073 or 13537591623\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500005 or 036906036\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500009 or 2S7G 9F593 AB or 1225303\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500016 or 03C906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500014 or 06F906036 and many more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese injectors were used in various makes and models, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORD\u003c\/strong\u003e Mondeo III - engines B5Y, B4Y - Saloon, B5Y - Estate, 1.8 SCi\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI \/ VOLKSWAGEN \/ SEAT\u003c\/strong\u003e engines:\u003c\/p\u003e\n\u003cp\u003eAPR, AXU, BAD, BVX, BVZ, BYD, CCTA, CCZA, CDLA, CDLB, CDLC, CDLD, CDLF, CDLG, CDLH, CDLJ, CDLK, CDMA, CRZA, CULC,  BAD, APR, AXU, CDAA, CDHA, CDHB, CJEB, CFBA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVW\u003c\/strong\u003e Bora \/ Eos \/ Golf \/ Lupo \/ Passat \/ Polo \/ Scirocco \/ EOS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSEAT\u003c\/strong\u003e  Exeo \/ Leon \/ Toledo \/ Altea - \u003cspan style=\"font-size: 0.875rem;\"\u003eengines - BWA, BWA1, BWE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI\u003c\/strong\u003e A1 \/ A2 - engine BAD \/ A3 - engines BLF, BLN, BLP \/ TT\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBMW\u003c\/strong\u003e 1 Series \/ 3 Series - Engines - N13 B16 A, N14 B16 A, N14 B16 C, N16 B16 A, N18 B16 A, N18 B16 C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMINI\u003c\/strong\u003e Clubman \/ Countryman \/ Convertible \/ Cooper (S) (JSW) \/ Coupe \/ Paceman \/ Roadster\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require the 14.5mm top seal\u003c\/strong\u003e as some newer injectors require a smaller 13mm outer diameter seal. If you require the smaller top seal, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e \u003ca title=\"GDI parts kit for high pressure injectors featuring top 13mm seals and Teflon bushes\" href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/seal-bush-kit-for-bosch-0261500-injectors-late-series-13mm-seals-kit-152?pr_prod_strat=collection_fallback\u0026amp;pr_rec_id=c7208e15f\u0026amp;pr_rec_pid=6777894928457\u0026amp;pr_ref_pid=15175420084602\u0026amp;pr_seq=uniform\"\u003e\u003cimg height=\"246\" width=\"246\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_152_new_5babf18c-52ee-4c39-860c-31ee112013e2.png?v=1750964929\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe upper seals are made of \u003cstrong\u003eViton, with higher rating hardness\u003c\/strong\u003e than standard port injectors' seals - 95shA - to deal with the higher pressure. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan color=\"#000000\"\u003eWe now include our \u003cstrong\u003enew all-metal, free-flowing filter baskets in all high-pressure seal kits\u003c\/strong\u003e. The original fitted filters seem to dissolve, including the plastic cage, causing serious injector blockage, we think due to fuel additives and the extremely high pressure. Unfortunately, if left, the particles of the previously installed filters are then pushed down inside the injector pintle causing issues with flow or even blocking flow completely. Fortunately, if changed early enough you can stop this happening by replacing them with our all-metal, free-flowing filters. These are great to use with Ethanol and Methanol fuel types as they have no reaction to alcohol.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe provide \u003cstrong\u003emetal claw clips\u003c\/strong\u003e to allow you to upgrade your broken or brittle plastic ones.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eThe Kit 204 contains: \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e4 x \u003cstrong\u003eUpgraded all-metal filter baskets to prevent future dissolving - \u003cspan style=\"text-decoration: underline;\"\u003eplastic filters should be avoided when possible when changing the filters in this type of injector\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4 x Diagonally opened spacers to allow for easy fitting\u003c\/p\u003e\n\u003cp\u003e4 x Viton 95 Shore rated upper rail seals\u003c\/p\u003e\n\u003cp\u003e4 x Lower Teflon bushes - these require changing every time you remove the injectors from the engine\u003c\/p\u003e\n\u003cp\u003e4 x Metal claw clips to upgrade from your brittle\/broken plastic ones.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cspan color=\"#000000\"\u003eTerms\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003ePLEASE NOTE: The lower bushes will require a tool to install them onto the pintle shafts.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":55562780017018,"sku":"kit 204","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_204_new_2_a81f85cd-8f42-4015-aa13-6d8c19aac1c6.png?v=1762269315"},{"product_id":"fuel-injector-seal-parts-set-including-decoupling-elements-for-bosch-0261500-original-injectors-4-cylinder-kit-204-copy","title":"Fuel Injector Seal \u0026 Parts Set For Bosch 0261500 Original Injectors 4 Cylinder - Kit 205","description":"\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003c\/span\u003e\u003c\/span\u003eFuel injector parts kit containing filters, rail seals, spacers and Teflon bushes for 4 cylinder TFSi FSi Ford, Alfa, Volkswagen, BMW, Seat, Audi, Mini and more fitted with early Bosch injector 0261500 series, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500020 or 06F906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500037 or 06F906036F\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500073 or 13537591623\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500005 or 036906036\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500009 or 2S7G 9F593 AB or 1225303\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500016 or 03C906036A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBosch 0261500014 or 06F906036 and many more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese injectors were used in various makes and models, for example:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORD\u003c\/strong\u003e Mondeo III - engines B5Y, B4Y - Saloon, B5Y - Estate, 1.8 SCi\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI \/ VOLKSWAGEN \/ SEAT\u003c\/strong\u003e engines:\u003c\/p\u003e\n\u003cp\u003eAPR, AXU, BAD, BVX, BVZ, BYD, CCTA, CCZA, CDLA, CDLB, CDLC, CDLD, CDLF, CDLG, CDLH, CDLJ, CDLK, CDMA, CRZA, CULC,  BAD, APR, AXU, CDAA, CDHA, CDHB, CJEB, CFBA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVW\u003c\/strong\u003e Bora \/ Eos \/ Golf \/ Lupo \/ Passat \/ Polo \/ Scirocco \/ EOS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSEAT\u003c\/strong\u003e  Exeo \/ Leon \/ Toledo \/ Altea - \u003cspan style=\"font-size: 0.875rem;\"\u003eengines - BWA, BWA1, BWE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDI\u003c\/strong\u003e A1 \/ A2 - engine BAD \/ A3 - engines BLF, BLN, BLP \/ TT\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBMW\u003c\/strong\u003e 1 Series \/ 3 Series - Engines - N13 B16 A, N14 B16 A, N14 B16 C, N16 B16 A, N18 B16 A, N18 B16 C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMINI\u003c\/strong\u003e Clubman \/ Countryman \/ Convertible \/ Cooper (S) (JSW) \/ Coupe \/ Paceman \/ Roadster\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require the 14.5mm top seal\u003c\/strong\u003e as some newer injectors require a smaller 13mm outer diameter seal. If you require the smaller top seal, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/seal-bush-kit-for-bosch-0261500-injectors-late-series-13mm-seals-kit-152?pr_prod_strat=collection_fallback\u0026amp;pr_rec_id=c7208e15f\u0026amp;pr_rec_pid=6777894928457\u0026amp;pr_ref_pid=15175420084602\u0026amp;pr_seq=uniform\" title=\"GDI parts kit for high pressure injectors featuring top 13mm seals and Teflon bushes\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_152_new_5babf18c-52ee-4c39-860c-31ee112013e2.png?v=1750964929\" alt=\"\" width=\"246\" height=\"246\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe upper seals are made of \u003cstrong\u003eViton, with higher rating hardness\u003c\/strong\u003e than standard port injectors' seals - 95shA - to deal with the higher pressure. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan color=\"#000000\"\u003eWe now include our \u003cstrong\u003enew all-metal, free-flowing filter baskets in all high-pressure seal kits\u003c\/strong\u003e. The original fitted filters seem to dissolve, including the plastic cage, causing serious injector blockage, we think due to fuel additives and the extremely high pressure. Unfortunately, if left, the particles of the previously installed filters are then pushed down inside the injector pintle causing issues with flow or even blocking flow completely. Fortunately, if changed early enough you can stop this happening by replacing them with our all-metal, free-flowing filters. These are great to use with Ethanol and Methanol fuel types as they have no reaction to alcohol.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eThe Kit 205 contains:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e4 x \u003cstrong\u003eUpgraded all-metal filter baskets to prevent future dissolving - \u003cspan style=\"text-decoration: underline;\"\u003eplastic filters should be avoided when possible when changing the filters in this type of injector\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4 x Diagonally opened spacers to allow for easy fitting\u003c\/p\u003e\n\u003cp\u003e4 x Viton 95 Shore rated upper rail seals\u003c\/p\u003e\n\u003cp\u003e4 x Lower Teflon bushes - these require changing every time you remove the injectors from the engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cspan color=\"#000000\"\u003eTerms\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003ePLEASE NOTE: The lower bushes will require a tool to install them onto the pintle shafts.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":55563017453946,"sku":"kit 205","price":24.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_205_new_69cf209c-af15-4628-b396-25c92fbb6681.png?v=1751039115"},{"product_id":"seal-bush-kit-for-bosch-0261500-gdi-late-series-injectors-with-13mm-rail-seals-4-cylinders-kit-152-copy","title":"Seal \u0026 Bush Kit for Bosch 0261500 GDI Late Series Injectors with 13mm Rail Seals 5 Cylinders - Kit 154","description":"\u003cp\u003eThis kit was designed for later series Bosch 0261500 and equivalent TFSi FSi injectors that require smaller 13mm rail seals than the original GDI injectors, these have fitments in Ford, Audi, Skoda, Seat, Jaguar, VW, Kia, Alfa and more.\u003c\/p\u003e\n\u003cp\u003eThis parts kit for 5 cylinders contains the top seals and Teflon bushes to enable you to refurbish your injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe upper seals are Viton with higher rating hardness than standard port injectors of 90shA to deal with the higher pressure.\u003c\/p\u003e\n\u003cp\u003eThe following are some of the injectors compatible with this kit but \u003cem\u003ethis is not an exhaustive list:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e06H906036H\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \u0026amp; \u003cstrong\u003eVW\u003c\/strong\u003e Golf \/ Polo \/ Passat\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500092 or 16600 1KC0A\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cerato Koup \/ Sportage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500100 or 35310 2B110, 35310 2B130\u003c\/strong\u003e - fitments in \u003cstrong\u003eKia\u003c\/strong\u003e Carens \/ Cee'd \/ Sportage \/ Soul \u0026amp; \u003cstrong\u003eHyundai\u003c\/strong\u003e i30 \/ i35 \/ i40 \/ Veloster\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500103 or BM5G9F593BA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Focus \/ Galaxy \/ Mondeo \/ S-Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500123 or 06K906036\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp;\u003cstrong\u003e Seat \u003c\/strong\u003eLeon \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500155 or CJ5G9F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e C-Max (Grand) \/ Fiesta \/ Focus \/ Galaxy \/ Kuga \/ Mondeo \/ S-Max \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500160 or 06H906036Q\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ TT \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Octavia \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500162 or 06H906036P\u003c\/strong\u003e - fitments in \u003cstrong\u003eVW\u003c\/strong\u003e Amarok \/ Beetle \/ Eos \/ Golf \/ Jetta \/ Multivan \/ Passat \/ Scirocco \/ Sharan \/ Tiguan \/ Transporter \u0026amp;\u003cstrong\u003e Audi\u003c\/strong\u003e A3 \/ A4 \/ A5 \/ A6 \/ A8 \/ Q3 \/ Q5 \/ TT\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500220 or DM5G9F593AA \u003c\/strong\u003e- fitments in \u003cstrong\u003eFord\u003c\/strong\u003e B-Max \/ C-Max \/ Ecosport \/ Fiesta \/ Focus \/ Grand \/ Mondeo \/ Tourneo \/ Transit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500296 or DX239F593AA\u003c\/strong\u003e - fitments in \u003cstrong\u003eJaguar\u003c\/strong\u003e F-Pace \/ F-Type \/ XE \/ XF \/ XJ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500354 or 04E906036E or 04E906036Q or 0261500355 or 0261500248\u003c\/strong\u003e - fitments in \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp; \u003cstrong\u003eSkoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500477 or 04E906036AF\u003c\/strong\u003e - fitments in\u003cstrong\u003e Skoda\u003c\/strong\u003e Fabia \/ Octavia \/ Rapid \/ Superb \/ Yeti \u0026amp; \u003cstrong\u003eSeat\u003c\/strong\u003e Leon \/ Ibiza \u0026amp; \u003cstrong\u003eAudi\u003c\/strong\u003e A1 \/ A3 \/ A4 \/ Q3 \u0026amp;\u003cstrong\u003e VW\u003c\/strong\u003e Beetle \/ Caddy \/ CC \/ Golf \/ Jetta \/ Passat \/ Polo \/ Scirocco \/ Tiguan \/ Touran\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0261500556 or DM5G9F593AB\u003c\/strong\u003e - fitments in \u003cstrong\u003eFord\u003c\/strong\u003e Fiesta \/ Focus \/ B-Max \/ C-Max \/ Ecosport \/ Mondeo \/ Transit \/ Tourneo Connect\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease ensure your injectors require a 13mm top seal and not the 14.5mm ones\u003c\/strong\u003e, if you require 14.5mm top seals, the kit can be found here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mrinjectoruk.co.uk\/products\/fuel-injector-seal-filter-teflon-bush-set-for-bosch-0261500-original-injectors-4-cylinder-kit-160-copy?_pos=1\u0026amp;_psq=204\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"parts kit for GDI injectors featuring filter baskets, spacers, seals and decoupling elements\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Kit_204_B_921b4d06-036a-4b90-a9d9-3ee8fcabe552.png?v=1751031346\" alt=\"\" width=\"240\" height=\"240\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cp\u003eSeal Kit 154 contains:\u003c\/p\u003e\n\u003cp\u003e5 x Upper rail seals 13mm\u003c\/p\u003e\n\u003cp\u003e5 x Lower pintle bushes - these Teflon bushes should be changed every time the injectors are removed from the engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTerms\u003c\/p\u003e\n\u003cp\u003eWe have other cylinder sizes available - search '13mm' to view them all.\u003c\/p\u003e\n\u003cp\u003ePlease note: The lower bushes will require a special tool to install them onto the pintle shaft.\u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specification of originally installed parts at manufacture. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":55570729402746,"sku":"kit 154","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit_154_new.png?v=1751029437"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/collections\/High_pressure_GDI_BA2.png?v=1670425612","url":"https:\/\/www.mrinjectoruk.co.uk\/zh\/collections\/ford-disi.oembed","provider":"Mr Injector UK - Petrol Injector Servicing \u0026 Diagnostics","version":"1.0","type":"link"}