{"title":"Siemens","description":"\u003cp data-mce-fragment=\"1\"\u003eMr Injector UK has been working in petrol injector diagnostics and restoration for the past 30 years. We are one of the oldest Asnu test facilities.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur top of the range Asnu machines allow us to test and service top feed standard port, high pressure (GDI, HPI etc), Siemens \/ Bosch Piezo and side feed petrol injectors.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cimg height=\"215\" width=\"145\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/testing2_480x480.png?v=1674548855\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/testing2_480x480.png?v=1674548855\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe Method:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYour injectors are pre-cleaned, inductance load tested and run on a test rig as they would operate on your engine to check for any anomalies, we record this pre-service information on your report sheet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll parts are removed then we ultrasonically clean and backflush before returning to the ASNU test bench for dynamic analysis, which includes spray pattern checks, leak off and dynamic balance checks.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf they are metal-bodied EV1\/Weber\/Lucas type injectors, they would also be stripped of paint and rust, etched and hot bake painted in heat resistant paint. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAfter the service, new parts are installed where applicable and the report is sent across to you with the findings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe result is a beautifully cleaned and balanced set of injectors with restored flows and brand-new parts, ready to reinstall straight back into the vehicle. \u003c\/p\u003e","products":[{"product_id":"ford-focus-2001-1-6-siemens-deka-injector-98mf-bc9f593-98mf-ba","title":"Ford Focus 2001 1.6 Siemens Deka Injector 98MF-BC9F593 98MF-BA","description":"\u003cp\u003eReconditioned serviced Ford fuel injectors from a Ford Focus 2001 1.6 16valve.\u003c\/p\u003e\n\u003cp\u003eFlow tested, ultrasonically cleaned and fitted with new seals and filters. As good as new at a fraction of the price.\u003c\/p\u003e\n\u003cp\u003ePriced per injector.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":40025849495625,"sku":"98MF-BA","price":27.66,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_cef896e7-e616-4add-a024-0fd45f9b9534.jpg?v=1656036036"},{"product_id":"ford-fiesta-ka-1-25-zetec-s-fuel-injector-97mf-ba","title":"Ford Fiesta KA 1.25 Zetec S Fuel Injector 97MF-BA","description":"\u003cp data-mce-fragment=\"1\"\u003eSiemens side feed injector fitted to Ford Fiesta \/KA 1.25L Zetec S engine.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFord number stamped on the side of the injector:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e97MF-BA\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCovers any Ford Zetec S engine 1.25 litre with side draft injectors.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIdentify yours by part number stamped on side of the body.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDon't buy used injectors you don't know how they perform, ours are re-conditioned and guaranteed to be as good as new.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e These injectors have been flow tested and serviced using our ASNU test centre and refitted with new seals, pintle caps and filters. They are re flow tested before despatch.\u003c\/p\u003e","brand":"siemens","offers":[{"title":"Default Title","offer_id":40025866928201,"sku":"","price":23.66,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_fefcc59d-b2e0-404c-8af0-392f4643b7fb.jpg?v=1656036175"},{"product_id":"ford-denso-siemens-side-feed-injector-seal-kit-32","title":"Seal Kit For Side Feed Denso Siemens Injectors Fitted In Ford \u0026 Others - Kit 32","description":"\u003cp\u003eThis kit fits the side feed injectors fitted to Ford and other makes with Denso or Siemens injectors.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with Viton seals for the top and the bottom of the injectors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents \u003c\/h4\u003e\n\u003cp\u003eKit 32 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Top Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Bottom Viton seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms \u003c\/h4\u003e\n\u003cp\u003eNo injectors are included in the sale, it is there for identification purposes.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025877381193,"sku":"KIT32","price":11.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit32b.png?v=1661351345"},{"product_id":"bmw-12-cylinder-fuel-injector-seals-14-5mm-seal-size","title":"Viton Fuel Injector Seals 14.5mm Outer Diameter 12 Cylinder Kit - Fitted to Many Manufacturers - Kit 59","description":"\u003cp\u003eDesigned for 12 cylinder engines requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1 \/ EV12 \/ EV14, Lucas, Siemens and Weber injectors requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eMany manufacturers have these seals installed:\u003c\/p\u003e\n\u003cp\u003eBMW \/ Jaguar \/ Daimler\u003c\/p\u003e\n\u003cp\u003eFor example Jaguar \/ Daimler V12 applications fitted with Bosch injectors requiring the later 14.5mm seals, including Bosch 0280155007.\u003c\/p\u003e\n\u003cp\u003eCompatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 14.5mm seals, others take 15mm. Bosch changed their seal sizes around the year 2000, Lucas \/ Sagem used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 59 contains:\u003c\/p\u003e\n\u003cp\u003e12 x Top Viton 14.5mm OD seals\u003c\/p\u003e\n\u003cp\u003e12 x Bottom Viton 14.5mm OD seals\u003c\/p\u003e\n\u003cp\u003e24 seals in total.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003eIf you need our early kit featuring 15mm seals, that is Seal Kit 60.\u003c\/p\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025887768649,"sku":"KIT59","price":13.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit59b.png?v=1661436053"},{"product_id":"bmw-12-cylinder-fuel-injector-seals-15mm-seal-size","title":"Viton Fuel Injector Seals 15mm Outer Diameter 12 Cylinder Kit - Fitted to Many Manufacturers - Kit 60","description":"\u003cp\u003eDesigned for 12 cylinder engines with early injectors requiring 15mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1, Lucas, Sagem and Siemens injectors requiring 15mm seals.\u003c\/p\u003e\n\u003cp\u003eMany manufacturers have these seals installed:\u003c\/p\u003e\n\u003cp\u003eBMW \/ Audi \/ VW \/ Seat \/ Alfa Romeo \/ Fiat \/ Daewoo \/ Citroen \/ Peugeot \/ Chevrolet \/ Chrysler \/ Jeep \/ Bentley \/ Land Rover \/ Range Rover \/ Rover\u003c\/p\u003e\n\u003cp\u003eCompatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 15mm seals, others take 14.5mm. Bosch changed their seal sizes around the year 2000, Lucas used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 60 contains:\u003c\/p\u003e\n\u003cp\u003e24 x Viton 15mm seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025888129097,"sku":"KIT60","price":15.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit60b.png?v=1668183481"},{"product_id":"jeep-8-cylinder-fuel-injector-seals-14-5mm-seals","title":"Viton Fuel Injector Seals 14.5mm Outer Diameter 8 Cylinder Kit - Fitted to Many Manufactures - Kit 57","description":"\u003cp\u003eDesigned for 8 cylinder engines requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1 \/ EV12 \/ EV14, Lucas, Siemens and Weber injectors requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eMany manufactures have these seals installed:\u003c\/p\u003e\n\u003cp\u003eJeep \/ Chrysler \/ Audi \/ BMW \/ Bentley \/ VW \/ Seat \/ Ford \/ Alfa Romeo \/ Daewoo \/ Citroen \/ Chevrolet \/ Fiat \/ Peugeot \/ Jaguar \/ Daimler\u003c\/p\u003e\n\u003cp\u003eCompatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 14.5mm seals. Nippon Hitachi can take 11mm, 12mm \u0026amp; 13mm. Bosch changed their seal sizes around the year 2000. Lucas \/ Sagem used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 57 contains:\u003c\/p\u003e\n\u003cp\u003e16 x 14.5mm OD seals in Viton\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025888948297,"sku":"KIT57","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit57b_57f31c52-5372-4c87-b5dc-681962cce565.png?v=1668183478"},{"product_id":"alfa-romeo-6-cylinder-fuel-injector-seal-kit-14-5mm","title":"Viton Fuel Injector Seals 14.5mm Outer Diameter 6 Cylinder Kit - Fitted to Many Manufactures - Kit 53","description":"\u003cp\u003eDesigned for 6 cylinder engines requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eFor compatible injectors fitted in the following vehicle makes:\u003c\/p\u003e\n\u003cp\u003eAlfa Romeo \/ BMW \/ Chrysler \/ Citroen \/ Daewoo \/ Fiat \/ Jeep \/ Peugeot\u003c\/p\u003e\n\u003cp\u003eSuitable applications include Bosch EV1 \/ EV12 \/ EV14 seal to rail injectors \/ Lucas \/ Siemens \/ Weber \/ Denso \/ Keihin. Compatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 14.5mm seals, others take 15mm. Bosch changed their seal sizes around the year 2000, Lucas \/ Sagem used 15mm, Delphi still use 15mm top seals. Nippon Hitachi injectors can take 11mm, 12mm or 13mm seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents \u003c\/h4\u003e\n\u003cp\u003eSeal Kit 53 contains:\u003c\/p\u003e\n\u003cp\u003e12 x 14.5mm OD Viton seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025890357321,"sku":"KIT53","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit53b.png?v=1668183478"},{"product_id":"audi-5-cylinder-fuel-injector-seals-14-5mm-seal-size","title":"Viton Fuel Injector Seals 14.5mm Outer Diameter 5 Cylinder Kit - Fitted to Many Manufactures - Kit 55","description":"\u003cp\u003eDesigned for 5 cylinder engines requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1 \/ EV12 \/ EV14 and Siemens injectors requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eVehicle makes mentioned across our 14.5mm seal-kit range:\u003c\/p\u003e\n\u003cp\u003eAudi \/ VW \/ Seat \/ Ford \/ Alfa Romeo \/ BMW \/ Daewoo \/ Citroen \/ Chrysler \/ Chevrolet \/ Fiat \/ Jeep \/ Peugeot \/ Bentley \/ Jaguar \/ Daimler\u003c\/p\u003e\n\u003cp\u003eThis list covers applications across different cylinder-count kits and does not confirm five-cylinder fitment for every make. Compatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 14.5mm seals, others take 15mm. Bosch changed their seal sizes around the year 2000, Lucas used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 55 contains:\u003c\/p\u003e\n\u003cp\u003e10 x 14.5mm OD Viton seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025890422857,"sku":"KIT55","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit55b.png?v=1668183484"},{"product_id":"audi-5-cylinder-fuel-injector-seals-15mm-seal-size","title":"Viton Fuel Injector Seals 15mm Outer Diameter 5 Cylinder Kit - Fitted to Many Manufactures - Kit 56","description":"\u003cp\u003eDesigned for 5 cylinder engines requiring 15mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1 and Siemens injectors requiring 15mm seals.\u003c\/p\u003e\n\u003cp\u003eVehicle makes mentioned across our 15mm seal-kit listings:\u003c\/p\u003e\n\u003cp\u003eAudi \/ VW \/ Seat \/ Alfa Romeo \/ Fiat \/ Daewoo \/ Citroen \/ Peugeot \/ Chevrolet \/ BMW \/ Chrysler \/ Jeep\u003c\/p\u003e\n\u003cp\u003eThis list covers applications across different cylinder-count kits and does not confirm five-cylinder fitment for every make. Compatibility depends on the injector fitted and its required seal size, not the vehicle make alone.\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 15mm seals, others take 14.5mm. Bosch changed their seal sizes around the year 2000, Lucas used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 56 contains:\u003c\/p\u003e\n\u003cp\u003e10 x Viton 15mm seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025890455625,"sku":"KIT56","price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit56b.png?v=1668183480"},{"product_id":"ford-4-cylinder-fuel-injector-seals-14-5mm-seal-size","title":"Viton Fuel Injector Seals 14.5mm Outer Diameter 4 Cylinder Kit - Fitted to Many Manufactures - Kit 51","description":"\u003cp\u003eDesigned for 4 cylinder engines requiring 14.5mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1 \/ EV12 \/ EV14 seal to rail injectors, Siemens, Weber, Denso, Keihin, some Sagem and more. \u003c\/p\u003e\n\u003cp\u003eMany manufactures have these seals installed:\u003c\/p\u003e\n\u003cp\u003eFord \/ Alfa Romeo \/ BMW \/ Daewoo \/ Citroen \/ Chrysler \/ Chevrolet \/ VW \/ Audi \/ Seat\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 14.5mm seals, Bosch changed their seal sizes around the year 2000, Lucas\/Sagem used 15mm, Delphi still use 15mm top seals. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents \u003c\/h4\u003e\n\u003cp\u003eSeal Kit 51 contains:\u003c\/p\u003e\n\u003cp\u003e8 x 14.5mm OD Viton seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025890488393,"sku":"KIT51","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit51b_d092bce9-c569-4ce0-b65e-17769995be47.png?v=1668183478"},{"product_id":"audi-4-cylinder-fuel-injector-seals-15mm-seal-size","title":"Viton Fuel Injector Seals 15mm Outer Diameter 4 Cylinder Kit - Fitted to Many Manufactures -  - Kit 52","description":"\u003cp\u003eDesigned for 4 cylinder engines requiring 15mm seals.\u003c\/p\u003e\n\u003cp\u003eThese seals are suitable for Bosch EV1, Siemens, Sagem and more.\u003c\/p\u003e\n\u003cp\u003eMany manufactures have these seals installed:\u003c\/p\u003e\n\u003cp\u003eAudi \/ Alfa Romeo \/ Fiat \/ Daewoo \/ Citroen \/ Peugeot \/ Chevrolet \/ BMW\u003c\/p\u003e\n\u003cp\u003eNot all injectors take the 15mm seals, others take 14.5mm. Bosch changed their seal sizes around the year 2000, Lucas\/Sagem used 15mm, Delphi still use 15mm top seals.\u003c\/p\u003e\n\u003cp\u003eWe stock the correct size seal for your injectors, please email us your injector numbers if you need help.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 52 contains:\u003c\/p\u003e\n\u003cp\u003e8 x 15mm OD Viton seals \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003ePremium Economy Seal Kit Sets\u003c\/p\u003e\n\u003cp\u003eOur economy seal sets are for those not wishing to buy the complete overhaul kit (which we can also supply). Economy does not mean cheap, nasty material; all our kits are British made, all seals are made of Viton.\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025890521161,"sku":"KIT52","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit52b_51c04c46-ffd9-418a-962d-d2aaa83f886a.png?v=1668183478"},{"product_id":"vauxhall-astra-vectra-90501588-5wk90761","title":"Vauxhall Astra Vectra 90501588 5WK90761 Fuel Injector","description":"\u003cp\u003eSiemens 5WK90761 injector fitted to Vauxhall Opel Astra Vectra B 95-2002 1.8 \u0026amp; 2.0 Vauxhall 90501588.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese have been serviced to perfection.\u003c\/p\u003e\n\u003cp\u003ePriced per injector.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025894322249,"sku":"5WK90761","price":28.74,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_f97470c5-6e5f-4d6f-9ab4-715b999364ed.jpg?v=1668183482"},{"product_id":"vauxhall-90536149-injector","title":"Vauxhall 90536149 Fuel Injector","description":"\u003cp\u003eThis item is at sale price and has been reduced by 20%\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFuel injector for Vauxhall Vectra Signum 1.8 also Saab 9-3 sport 1.8 fitted with Siemens injectors \u003cstrong\u003e5WK93151\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM part number 90536149\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese injectors are serviced, flow tested and 16000 pulse inductance tested to ensure you get a first class injector to install in your engine.\u003c\/p\u003e\n\u003cp\u003ePriced per injector.\u003c\/p\u003e","brand":"siemens","offers":[{"title":"Default Title","offer_id":40025896550473,"sku":"90536149","price":22.59,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_ffe6905f-77e4-41a6-8af2-7293cd509288.jpg?v=1668183474"},{"product_id":"rover-75-kv6-2-0-litre-siemens-deka-mjy100490-injector-seals-o-ring-kit","title":"Seal \u0026 Filter Kit For Rover 75 KV6 2.0 \u0026 2.5 Siemens Deka MJY100490 \/ MJY100620 Injectors - Kit 119","description":"\u003cp\u003eThis kit was designed for Siemens Deka fuel injectors fitted to Rover 75 KV6 2.0 and 2.5 litre engines.\u003c\/p\u003e\n\u003cp\u003eRover 75 KV6 2.0 litre: Siemens Deka MJY100490 fuel injectors.\u003c\/p\u003e\n\u003cp\u003eRover 75 KV6 2.5 litre: Siemens Deka MJY100620 fuel injectors.\u003c\/p\u003e\n\u003cp\u003eIt contains the Viton seals and replacement filter baskets to refurbish your 6 injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe seals are equivalent to MKD000010 MKD000030L MKD000040.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 119 contains:\u003c\/p\u003e\n\u003cp\u003e6 x Filter baskets\u003c\/p\u003e\n\u003cp\u003e6 x Top Viton seals\u003c\/p\u003e\n\u003cp\u003e6 x Middle Viton seals\u003c\/p\u003e\n\u003cp\u003e6 x Bottom Viton seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003eThe injector in the photo is for identification purposes, no injectors are included in the sale.\u003c\/p\u003e\n\u003cp\u003eThese are not Rover parts, the reference numbers quoted are for your identification. All kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025898582089,"sku":"KIT119","price":33.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_643957d4-21bb-4b92-9556-409b5f0df2c9.jpg?v=1668183474"},{"product_id":"volvo-s40-v40-9454710-9202694-siemens-injector-seals-o-ring-kit","title":"Volvo S40 V40 Compatible 9454710 9202694 Siemens Deka Injector Seal Kit - Kit 120","description":"\u003cp\u003eThis kit was designed for Volvo S40 V40 fitted with Siemens Deka 9454710 9202694 fuel injectors.\u003c\/p\u003e\n\u003cp\u003eContained are the upper, middle and lower seals, all in Viton, plus the filter baskets to overhaul your 4 injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe seals are equivalent to MKD000010 MKD000030L MKD000040.\u003c\/p\u003e\n\u003cp\u003ePlease see additional photo to help identify your injectors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 120 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Top Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Mid Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Lower Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Filter baskets\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003eThe photo of the injector is there to help you to identify your injectors, no injectors are included in the sale.\u003c\/p\u003e\n\u003cp\u003eThese are not Volvo parts, the reference numbers quoted are for your identification.  \u003c\/p\u003e\n\u003cp\u003eAll parts equal to or exceed specifications of originally installed parts at manufacture.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025898647625,"sku":"seal kit 120","price":22.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_15e7fe00-e1e4-4121-b46f-025afbd55d1c.jpg?v=1668183479"},{"product_id":"vauxhall-z18xe-90536149-5wk93151-siemens-fuel-injector-seals-o-ring-kit","title":"Fuel Injector Seal \u0026 Filter Kit for Siemens Deka Injectors - Vauxhall, Saab \u0026 Volvo - Kit 120","description":"\u003cp\u003eThis seal kit was designed for Siemens Deka fuel injectors fitted to Vauxhall Z18XE, Saab 9-3 1.8 and Volvo S40 V40.\u003c\/p\u003e\n\u003cp\u003eVauxhall Z18XE: injector references 90536149 and 5WK93151.\u003c\/p\u003e\n\u003cp\u003eVolvo S40 V40: injector references 9454710 and 9202694.\u003c\/p\u003e\n\u003cp\u003eIt contains the upper, middle and lower seals, all in Viton, plus the filter baskets to refurbish your 4 injectors at home.\u003c\/p\u003e\n\u003cp\u003eThe seals are equivalent to MKD000010 MKD000030L MKD000040.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 120 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Top Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Mid Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Lower Viton seals\u003c\/p\u003e\n\u003cp\u003e4 x Filter baskets\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003eThe photo of the injector is there to help you to identify your injectors, no injectors are included in the sale.\u003c\/p\u003e\n\u003cp\u003eThese are not Vauxhall, GM, Saab or Volvo parts, the reference numbers quoted are for your identification.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025898713161,"sku":"KIT120","price":22.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_a386a5ed-f4f7-4941-ab7a-ac7acb9d2eb0.jpg?v=1668183479"},{"product_id":"fuel-injector-flow-test-and-service-for-side-feed-injectors","title":"Fuel Injector Flow Test \u0026 Service - Side Feed Injectors","description":"\u003cp\u003eMr Injector UK has been working in petrol injector diagnostics and restoration for the past 30 years. We are one of the oldest Asnu test facilities.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/Jecssidefeedb_480x480.png?v=1670241577\" alt=\"\" width=\"206\" height=\"202\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis service is for side feed injectors that are working and not seized. \u003c\/p\u003e\n\u003cp\u003eYour injectors will be pre-cleaned, inductance load tested and run on a test rig as they would operate on your engine to check for any anomalies, we record this pre-service information on your report sheet.\u003c\/p\u003e\n\u003cp\u003eAll parts are removed then we ultrasonically clean and back-flush before returning to the ASNU test bench for dynamic analysis, which includes spray pattern checks, leak off and dynamic balance checks.\u003c\/p\u003e\n\u003cp\u003eAfter the test and service all new parts are installed where applicable and the report will be drafted and sent across to you with the findings.\u003c\/p\u003e\n\u003cp\u003ePlease note: The new parts are a separate price to this service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll services show as 'sold out' to avoid them being booked through the website - please email your serial numbers to mrinjectorukware@gmail.com for a quote. All services available to UK residents.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mr Injector UK ultrasonic service","offers":[{"title":"Default Title","offer_id":40025899008073,"sku":"side feed service","price":28.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_81fb0560-4b5d-438e-aaa5-89cb7a9a3c8f.jpg?v=1668181188"},{"product_id":"vauxhall-signum-vectra-c-z22y-siemens-fuel-injector-seal-kit-for-24404012","title":"Seals For Vauxhall Signum Vectra C Z22Y Siemens 24404012 Injectors - Kit 133","description":"\u003cp\u003eThis seal kit was designed for Siemens injectors 24404012, 3860-501, 6263A00146.\u003c\/p\u003e\n\u003cp\u003eThe injector is fitted to the Vectra C and Signum Z22YH engine.\u003c\/p\u003e\n\u003cp\u003eThis kit contains the curly spacers, Teflon bushes and the Viton top rail seals to refurbish your 4 injectors at home.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 133 contains:\u003c\/p\u003e\n\u003cp\u003e4 x Viton top seals\u003c\/p\u003e\n\u003cp\u003e4 x Curly spacers\u003c\/p\u003e\n\u003cp\u003e4 x Teflon bushes\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Important: Warm the Teflon bushes before installation.\u003c\/strong\u003e\u003cbr\u003eTo avoid snapping the bushes, warm them first (e.g., in hot water) to relax the material before fitting them with a swaging tool. \u003cstrong\u003eForcing them while cold will cause them to split or fracture.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e⚠️ A swaging tool is required\u003c\/strong\u003e to install the bushes onto the pintle shafts of the injectors.\u003c\/p\u003e\n\u003cp\u003eThe photo of the injector is for identification purposes. No injectors are included in the sale.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003cbr\u003e\u003c\/p\u003e","brand":"Mr Injector overhaul kit","offers":[{"title":"Default Title","offer_id":40025900220489,"sku":"KIT133","price":30.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/kit133new.png?v=1692106684"},{"product_id":"vw-audi-vag-siemens-deka-036906031l-fuel-injector","title":"VW Audi VAG Siemens Deka 036906031L Fuel Injector","description":"\u003cp\u003eThese injectors are from the vehicle manufacturers R \u0026amp; D testing.\u003c\/p\u003e\n\u003cp\u003eWhen we say we test them, we really do put all of them through their paces.\u003c\/p\u003e\n\u003cp\u003eWe have three Asnu test bench service units working on these all day long\u003c\/p\u003e\n\u003cp\u003eSO WHEN WE SAY THEY ARE IN EXCELLENT OPERATION WE KNOW WHAT WE ARE TALKING ABOUT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDO NOT BUY JUST BECAUSE IT SAYS YOUR VEHICLE TYPE, LOOK AT THE INJECTOR NUMBERS, LOOK AT THE PICTURE. IS YOURS DIFFERENT? YOU NEED A DIFFERENT INJECTOR.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey have the benefit of being flow and batch tested should you want more than one  to ensure each set is balanced with minimal drift . They are guaranteed to perform like new, they are NOT Chinese copies, they are genuine Siemens injectors.\u003c\/p\u003e\n\u003cp\u003eSome may have external marks on due to testing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e If this is not your injector we have over 11,000 in stock, please ask.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing price is for 1 x injector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFitted to VW Audi VAG Skoda\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease check the numbers on your injectors, they must have the following on them:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSiemens Deka 031906031L.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mr Injector UK Re-Manufactured","offers":[{"title":"Default Title","offer_id":40025902252105,"sku":"036906031L","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_30378ebc-dcfe-4d5b-a535-0ff291a70db0.jpg?v=1668183472"},{"product_id":"bmw-10181010-13537565137-13537589048-siemens-piezo-injector-flow-test-service","title":"BMW Siemens Piezo \u0026 Mercedes Bosch Piezo Injector Test \u0026 Clean","description":"\u003cp\u003e\u003cspan style=\"color: rgb(245, 16, 16);\"\u003e\u003cstrong\u003eYOU DO NOT NEED TO RESERVE A SLOT FOR THIS INJECTOR TYPE - WE CAN FIT THEM BETWEEN OUR LARGER JOBS. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(245, 16, 16);\"\u003e\u003cstrong\u003ePLEASE EMAIL MRINJECTORUKWARE@GMAIL.COM WITH THE QUANTITY YOU'RE SENDING AND YOUR ADDRESS FOR THE INVOICE.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a full diagnostics test and clean of your set of Siemens Piezo or Bosch Piezo injectors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBMW 10181010 13537565137  13537589048\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMercedes Bosch 0261500804  A2560705600 0261500065\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan\u003eThis\u003c\/span\u003e includes resistance testing, leak testing, spray analysis (see video), internal\/external cleaning, and rebushing with new Teflon bushes after the service. You would then be sent a report detailing the before and after findings.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnfortunately, there is no repairing these injectors, they either pass the testing or they don't. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the nature of this injector, we do not warrant any period of time after the service for any failure. The results on the report are at the time of test only and give no future serviceability of these injectors. They are extremely temperamental and highly delicate items.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"218\" width=\"76\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/14255708_480x480.jpg?v=1670239255\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFURTHER WORDS OF WARNING\u003c\/p\u003e\n\u003cp\u003e1) Do not test these yourself by trying to connect voltage across the terminal to see if they work, they operate at dangerous levels of high pressure and require 170 volt firing line to open and close them.\u003c\/p\u003e\n\u003cp\u003e2) These injectors are coded, when removing them for service please make sure you number each one with the relative cylinder number so they can be replaced in the correct cylinder, unless you have the facilities to re-code them in.\u003c\/p\u003e\n\u003cp\u003e3) These injectors are very prone to damage, extreme care is required to remove and package them ready to send to us. Undue shock \u0026amp; vibration can destroy these injectors, it damages the crystals so pack them well in a double roll of bubble wrap. For obvious reasons, DO NOT pin punch cylinder mark these injectors. Use the 6 digit programming code for your identification that is already on the injector. Please DO NOT just put them into a jiffy bag\/box, if they were WORKING when you removed them make sure they arrive with us in the same condition.\u003c\/p\u003e\n\u003cp\u003e4) If any of your injectors fail the testing, you will need to replace them directly from BMW\/Mercedes, avoid 'refurbished' Piezos sold online, it cannot be done. Please also avoid anything being sold for cheap prices as they will likely be dangerous counterfeits.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Piezosiemensflow2_480x480.png?v=1670260634\" alt=\"\" width=\"193\" height=\"266\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSiemens Piezo BMW injector service information:\u003c\/p\u003e\n\u003cp\u003eWe have no facility to accept vehicles, we do not remove or install injectors.\u003c\/p\u003e\n\u003cp\u003eWe are an injector testing facility; all injectors arrive by hand or courier.\u003c\/p\u003e\n\u003cp\u003eNo injectors are included in the sale, this is a service to your Piezo injectors.\u003c\/p\u003e\n\u003cp\u003eThe test price is £35.00 per injector.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePiezo Disclaimer\u003c\/h4\u003e\n\u003cp\u003eWe are sorry but we will not enter into a conversation regarding your vehicle history or running problems with regard to these Siemens injectors. This is due to the huge volume of calls that arrive everyday asking advice.\u003c\/p\u003e\n\u003cp\u003eYou must have your own diagnosis carried out as there are too many variables, we are not with your car to run the tests and we won’t speculate.\u003c\/p\u003e\n\u003cp\u003eVirtually all of these injectors degrade at the pintle seat, mainly due to bad fuel quality.\u003c\/p\u003e\n\u003cp\u003eIt is advised they run on Shell Vmax or similar all the time, even this only prolongs the life and does not guarantee they won't fail over time.\u003c\/p\u003e\n\u003cp\u003eIt’s now clear that less than 50% of these injectors respond to service; any signs of leaking will cause rough start up in the mornings and generally an over fuelling situation.\u003c\/p\u003e\n\u003cp\u003eThe Piezo crystals can reduce due to vibration and bad handling, when this occurs the programs charge figure will not represent the remaining working crystal size and therefore over-fuel.\u003c\/p\u003e\n\u003cp\u003eUnfortunately, there is no repairing these injectors, they either pass the testing or they don't. Due to the nature of this injector, we do not warrant any period of time after the service for any failure. The results on the report are at the time of test only and give no future serviceability of these injectors. They are extremely temperamental and highly delicate items.\u003c\/p\u003e\n\u003cp\u003eBy booking a service, you accept these conditions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you would like to book a test, please email mrinjectorukware@gmail.com with the quantity you're sending and your address. We'll send your invoice and instructions on how to send them.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mr Injector UK ultrasonic service","offers":[{"title":"Default Title","offer_id":40025902841929,"sku":"10181010","price":35.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/Copy_of_Red_Simple_Vintage_Christmas_Opening_Hours_Instagram_Post_800_x_800_px_1.png?v=1785328624"},{"product_id":"siemens-deka-9125118-injector-volvo-s40-v40-95-2004","title":"Siemens Deka 9125118 Fuel Injector Volvo S40 V40 95-2004","description":"\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThese are genuine Siemens Deka injectors, remanufactured in our engineering facility.\u003cbr data-mce-fragment=\"1\"\u003eVariable application for this injector, just make sure you check the number on your injectors.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolvo S40 V40 2.0 litre B424S engines\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e9125118\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThese injectors have been fully restored to perfect function in our service engineering centre. We have full test bench facilities. We only deal with PETROL injectors. We are ASNU high performance injector distributors. We have been restoring and servicing petrol injectors for 30+ years.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThis listing price is for 1 x injector.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong\u003ePlease check the numbers on your injectors, they must have the following on them: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong\u003eSiemens Deka 9125118 (purple)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eWe do not sell cheap Chinese copy injectors,\u003cbr data-mce-fragment=\"1\"\u003ethese are the genuine item.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhy should you buy a Mr Injector UK injector?\u003cbr data-mce-fragment=\"1\"\u003eWe do nothing else but petrol injectors.\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOur Injector Remanufacturing Process\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eThe injectors are component stripped, descaled, rust \u0026amp; paint removed, pre work flow tested to check for spray pattern, balance and leak tests and running inductance load testing.\u003cbr\u003e    \u003cimg width=\"190\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192764_o.jpg?v=1655969447\" height=\"125\" alt=\"\"\u003e \u003cimg width=\"190\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192808_o.jpg?v=1655969449\" height=\"127\" alt=\"\"\u003e\u003cbr\u003e They are then placed in an ultrasonic cleaning bath. This unique process causes the fluid to back flush as it cleans and with the filters removed allows the gums \u0026amp; resins to flow freely out from the top of the injector. Once we are satisfied that the fluid flow from the injector is clear of any contaminants we physically run the injector backwards to make sure there is nothing inside after the clean.\u003cbr\u003e \u003cimg width=\"206\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192844_o.jpg?v=1655969450\" height=\"132\" alt=\"\"\u003e  \u003cimg width=\"221\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192871_o.jpg?v=1655969452\" height=\"134\" alt=\"\"\u003e\u003cbr\u003eThe injectors are then returned to the Asnu test bench for visual assessment, for spray pattern flow balance and a 16,000 pulse inductance load run. Only then if they pass the test they are suitable to be sold as remanufactured injectors.\u003cbr\u003e  \u003cimg width=\"231\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192902_o.jpg?v=1655969454\" height=\"159\" alt=\"\"\u003e \u003cimg width=\"208\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192938_o.jpg?v=1655969455\" height=\"155\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003cp\u003eFinally the metal bodies are etched with acid and left for 24 hours to cure. Then coated with a durable baked VHT coating. All new components are fitted; seals, pintle caps, filters. They are then filled with liquid paraffin. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cimg width=\"265\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192963_o.jpg?v=1655969457\" height=\"175\" alt=\"\"\u003e \u003cimg width=\"246\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192987_o.jpg?v=1655969458\" height=\"161\" alt=\"\"\u003e\u003cbr\u003eThe result is a perfect working Mr Injector UK injector at the fraction of the price of a new one. Also many are no longer manufactured or available.\u003c\/p\u003e","brand":"Mr Injector UK Re-Manufactured","offers":[{"title":"Default Title","offer_id":40025913032777,"sku":"9125118","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_19f44ea1-e478-4f23-aa3e-1a4813b00cd2.jpg?v=1668183470"},{"product_id":"siemens-deka-875368-fuel-injector-renault-clio-1-4-8v-kangoo","title":"Siemens Deka 875368 Fuel Injector Renault Clio 1.4 8v Kangoo","description":"\u003cdiv style=\"text-align: left;\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThese are genuine Siemens Deka injectors, remanufactured in our engineering facility.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e Variable application for this injector, just make sure you check the number on your injectors.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e  \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e Renault Clio kangoo 1.4 8v\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e \u003cstrong\u003e875368\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e These injectors have been fully restored to perfect function in our service engineering centre. We have full test bench facilities. We only deal with PETROL injectors. We are ASNU high performance injector distributors. We have been restoring and servicing petrol injectors for 30+ years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eThis listing price is for 1 x injector.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePlease check the numbers on your injectors, they must have the following on them: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSiemens Deka 875368 (green)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e We do not sell cheap Chinese copy injectors,\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e these are the genuine item.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e Why should you buy a Mr Injector UK injector?\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e We do nothing else but petrol injectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 26pt; color: #000000;\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003eOur Injector Remanufacturing Process\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cbr\u003e\u003cspan style=\"font-family: 'times new roman', serif; color: #000000; font-size: 12pt;\"\u003eThe injectors are component stripped, descaled, rust \u0026amp; paint removed, pre work flow tested to check for spray pattern, balance and leak tests and running inductance load testing.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cimg alt=\"\" height=\"125\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192764_o.jpg?v=1655969447\" width=\"190\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e  \u003c\/span\u003e\u003c\/span\u003e\u003cimg alt=\"\" height=\"127\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192808_o.jpg?v=1655969449\" width=\"190\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: 'times new roman', serif; color: #000000; font-size: 12pt;\"\u003e They are then placed in an ultrasonic cleaning bath. This unique process causes the fluid to back flush as it cleans and with the filters removed allows the gums \u0026amp; resins to flow freely out from the top of the injector. Once we are satisfied that the fluid flow from the injector is clear of any contaminants we physically run the injector backwards to make sure there is nothing inside after the clean.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cimg alt=\"\" height=\"132\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192844_o.jpg?v=1655969450\" width=\"206\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cimg alt=\"\" height=\"134\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192871_o.jpg?v=1655969452\" width=\"221\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: 'times new roman', serif; color: #000000; font-size: 12pt;\"\u003eThe injectors are then returned to the Asnu test bench for visual assessment, for spray pattern flow balance and a 16,000 pulse inductance load run. Only then if they pass the test they are suitable to be sold as remanufactured injectors.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cimg alt=\"\" height=\"159\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192902_o.jpg?v=1655969454\" width=\"231\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cimg alt=\"\" height=\"155\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192938_o.jpg?v=1655969455\" width=\"208\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size: 12pt; color: #000000;\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003eFinally the metal bodies are etched with acid and left for 24 hours to cure. Then coated with a durable baked VHT coating. All new components are fitted; seals, pintle caps, filters. They are then filled with liquid paraffin. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cimg alt=\"\" height=\"175\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192963_o.jpg?v=1655969457\" width=\"265\"\u003e\u003cspan style=\"font-family: times new roman,serif;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cimg alt=\"\" height=\"161\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192987_o.jpg?v=1655969458\" width=\"246\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: 'times new roman', serif; color: #000000; font-size: 12pt;\"\u003eThe result is a perfect working Mr Injector UK injector at the fraction of the price of a new one. Also many are no longer manufactured or available.\u003c\/span\u003e\u003c\/p\u003e","brand":"Mr Injector UK Re-Manufactured","offers":[{"title":"Default Title","offer_id":40025913131081,"sku":"875368","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_c9961b9c-a08e-462c-8945-1bf750d68184.jpg?v=1668183470"},{"product_id":"siemens-deka-12565474-fuel-injector-gm-vauxhall-vectra-b-2-2-z22se","title":"Siemens Deka 12565474 Fuel Injector GM Vauxhall Vectra B 2.2 Z22SE","description":"\u003cdiv\u003e\n\u003cp\u003eThese are genuine Siemens Deka injectors, remanufactured in our engineering facility.\u003cbr\u003e Variable application for this injector, just make sure you check the number on your injectors\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eVauxhall GM Vectra 2.2 Z22SE engine\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e 12565474\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e These injectors have been fully restored to perfect function in our service engineering centre. We have full test bench facilities. We only deal with PETROL injectors. We are ASNU high performance injector distributors. We have been restoring and servicing petrol injectors for 30+ years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing price is for 1 x injector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease check the numbers on your injectors, they must have the following on them:\u003c\/p\u003e\n\u003cp\u003eSiemens Deka 12565474  (grey)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e We do not sell cheap Chinese copy injectors,\u003cbr\u003e these are the genuine item.\u003cbr\u003e \u003cbr\u003e Why should you buy a Mr Injector UK injector?\u003cbr\u003e We do nothing else but petrol injectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOur Injector Remanufacturing Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe injectors are component stripped, descaled, rust \u0026amp; paint removed, pre work flow tested to check for spray pattern, balance and leak tests and running inductance load testing.\u003cbr\u003e            \u003cimg alt=\"\" height=\"125\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192764_o.jpg?v=1655969447\" width=\"190\"\u003e\u003cspan face=\"times new roman, serif\"\u003e \u003c\/span\u003e\u003cimg alt=\"\" height=\"127\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192808_o.jpg?v=1655969449\" width=\"190\"\u003e\u003cbr\u003e They are then placed in an ultrasonic cleaning bath. This unique process causes the fluid to back flush as it cleans and with the filters removed allows the gums \u0026amp; resins to flow freely out from the top of the injector. Once we are satisfied that the fluid flow from the injector is clear of any contaminants we physically run the injector backwards to make sure there is nothing inside after the clean.\u003cbr\u003e         \u003cimg alt=\"\" height=\"132\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192844_o.jpg?v=1655969450\" width=\"206\"\u003e \u003cimg alt=\"\" height=\"134\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192871_o.jpg?v=1655969452\" width=\"221\"\u003e\u003cbr\u003eThe injectors are then returned to the Asnu test bench for visual assessment, for spray pattern flow balance and a 16,000 pulse inductance load run. Only then if they pass the test they are suitable to be sold as remanufactured injectors.\u003cbr\u003e      \u003cimg alt=\"\" height=\"159\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192902_o.jpg?v=1655969454\" width=\"231\"\u003e \u003cimg alt=\"\" height=\"155\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192938_o.jpg?v=1655969455\" width=\"208\"\u003e\u003c\/p\u003e\n\u003cp\u003eFinally the metal bodies are etched with acid and left for 24 hours to cure. Then coated with a durable baked VHT coating. All new components are fitted; seals, pintle caps, filters. They are then filled with liquid paraffin. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    \u003cimg alt=\"\" height=\"175\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192963_o.jpg?v=1655969457\" width=\"265\"\u003e \u003cimg alt=\"\" height=\"161\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192987_o.jpg?v=1655969458\" width=\"246\"\u003e\u003cbr\u003eThe result is a perfect working Mr Injector UK injector at the fraction of the price of a new one. Also many are no longer manufactured or available.\u003c\/p\u003e","brand":"Mr Injector UK Re-Manufactured","offers":[{"title":"Default Title","offer_id":40025913819209,"sku":"12565474","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_ac08fa40-e0d7-4093-bc6b-a9068ac63021.jpg?v=1668183470"},{"product_id":"siemens-deka-0000787423-fuel-injector-mercedes-c-class-s202","title":"Siemens Deka 0000787423 Fuel Injector Mercedes C Class S202","description":"\u003cdiv data-mce-style=\"text-align: left;\"\u003e\n\u003cp\u003eThese are genuine Siemens Deka injectors, remanufactured in our engineering facility.\u003cbr\u003e Variable application for this injector, just make sure you check the number on your injectors\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eMercedes C class S202\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e 0000787423\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e These injectors have been fully restored to perfect function in our service engineering centre. We have full test bench facilities. We only deal with PETROL injectors. We are ASNU high performance injector distributors. We have been restoring and servicing petrol injectors for 30+ years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing price is for 1 x injector.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease check the numbers on your injectors, they must have the following on them:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSiemens Deka 0000787423 (grey)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e We do not sell cheap Chinese copy injectors,\u003cbr\u003e these are the genuine item.\u003cbr\u003e \u003cbr\u003e Why should you buy a Mr Injector UK injector?\u003cbr\u003e We do nothing else but petrol injectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOur Injector Remanufacturing Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe injectors are component stripped, descaled, rust \u0026amp; paint removed, pre work flow tested to check for spray pattern, balance and leak tests and running inductance load testing.\u003cbr data-mce-fragment=\"1\"\u003e           \u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cimg data-mce-fragment=\"1\" height=\"150\" width=\"224\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192764_o.jpg?v=1655969447\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192764_o.jpg?v=1655969447\"\u003e   \u003cimg data-mce-fragment=\"1\" height=\"151\" width=\"226\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192808_o.jpg?v=1655969449\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192808_o.jpg?v=1655969449\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThey are then placed in an ultrasonic cleaning bath. This unique process causes the fluid to back flush as it cleans and with the filters removed allows the gums \u0026amp; resins to flow freely out from the top of the injector. Once we are satisfied that the fluid flow from the injector is clear of any contaminants, we physically run the injector backwards to make sure there is nothing inside after the clean.\u003cbr data-mce-fragment=\"1\"\u003e         \u003cimg data-mce-fragment=\"1\" height=\"148\" width=\"230\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192844_o.jpg?v=1655969450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192844_o.jpg?v=1655969450\"\u003e   \u003cimg data-mce-fragment=\"1\" height=\"142\" width=\"233\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192871_o.jpg?v=1655969452\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192871_o.jpg?v=1655969452\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe injectors are then returned to the Asnu test bench for visual assessment, for spray pattern flow balance and a 16,000 pulse inductance load run. Only then if they pass the test they are suitable to be sold as remanufactured injectors.\u003cbr data-mce-fragment=\"1\"\u003e     \u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cimg data-mce-fragment=\"1\" height=\"182\" width=\"220\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192902_o.jpg?v=1655969454\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192902_o.jpg?v=1655969454\"\u003e        \u003cimg data-mce-fragment=\"1\" height=\"156\" width=\"206\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192938_o.jpg?v=1655969455\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192938_o.jpg?v=1655969455\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFinally the metal bodies are etched with acid and left for 24 hours to cure. Then coated with a durable baked VHT coating. All new components are fitted, seals, pintle caps, filters etc. They are then filled with liquid paraffin. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e   \u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cimg data-mce-fragment=\"1\" height=\"129\" width=\"195\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192963_o.jpg?v=1655969457\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192963_o.jpg?v=1655969457\"\u003e              \u003cimg data-mce-fragment=\"1\" height=\"113\" width=\"189\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192987_o.jpg?v=1655969458\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/t\/4\/assets\/866192987_o.jpg?v=1655969458\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result is a perfect working Mr Injector UK injector at the fraction of the price of a new one. Also many are no longer manufactured or available.\u003c\/p\u003e\n\u003cbr\u003e","brand":"Mr Injector UK Re-Manufactured","offers":[{"title":"Default Title","offer_id":40025913884745,"sku":"787423","price":32.85,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/img_proxy_385dd51b-404e-44e7-8ad1-6af6530befbc.jpg?v=1668183475"},{"product_id":"fuel-injector-filters-6mm-x-10mm-all-metal","title":"Injector Filter For GDI FSI TFSI High Pressure Injectors 6mm x 10mm","description":"\u003cp\u003eAll-metal replacement filter basket for GDI FSI TFSI high pressure injectors requiring 6mm x 10mm filters. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese include injectors such as:\u003c\/p\u003e\n\u003cp\u003eBosch 0261500039 \/ 06F906036G\u003c\/p\u003e\n\u003cp\u003eBosch 0261500020 \/ 06F906036A\u003c\/p\u003e\n\u003cp\u003eBosch 0261500037 \/ 06F906036F\u003c\/p\u003e\n\u003cp\u003eBosch 0261500005 \/ 036906036 \u0026amp; many more.\u003c\/p\u003e\n\u003cp\u003eThese injectors were installed in many models such as \u003cstrong\u003eAudi, VW, Ford, Alfa, Skoda, Seat \u0026amp; more\u003c\/strong\u003e.\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are great to use with \u003cstrong\u003eEthanol and Methanol\u003c\/strong\u003e fuel types because they have no reaction to alcohol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThey are suitable for most standard port, high pressure and race injectors requiring 6mm x 3mm x 10mm filters. They also have applications in Denso, Sagem, Siemens and KTM Keihin injectors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhen refurbishing the parts on your high pressure injectors, we strongly advise installing our all-metal filter replacements because they are \u003cstrong\u003eresistant to being dissolved, unlike the original plastic ones\u003c\/strong\u003e. We think this happens due to the additives found in today's fuels. When this happens, \u003cstrong\u003eparticles of the original filters are pushed down into the injector pintle, reducing\/blocking flow and causing leaks\u003c\/strong\u003e. You would be surprised at the effects that a tiny particle can cause, some of which (particles) can't be seen by the naked eye. We see this daily with GDI injectors in for servicing.\u003c\/p\u003e\n\u003cp\u003eOur all-metal filter baskets are resistant to being dissolved so there is no chance of them breaking down and clogging the injectors they are supposed to protect.\u003c\/p\u003e\n\u003cp\u003eOurs are completely free-flowing because they do not have the plastic block at the base of the mesh that plastic filters have, this means that, even if installed deeply, they will not affect the flow rates of your injectors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot all high pressure GDI injectors take these filters, others can require extra thin filters or have a brass bung in the inlet port, preventing you from changing your filters. It is your responsibility to check which type you require before ordering.\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003ePack contains 1 x all-metal filter basket 6mm x 10mm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40025914212425,"sku":"19520310M","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/files\/19520310M.png?v=1762854469"},{"product_id":"siemens-siemens-deka-compatible-fuel-injector-kit-seals-filters-kit-2-s","title":"Viton Seals \u0026 Filters Kit For Siemens \u0026 Siemens Deka Injectors - Kit 2\/S","description":"\u003cp\u003eOur Kit 2\/S was designed to suit Siemens and Siemens Deka injectors that require the same-sized seals on the top and bottom.\u003c\/p\u003e\n\u003cp\u003eThe kit contains Viton fuel rail and manifold seals and our upgraded all-metal filter baskets to refurbish your 4 injectors at home.\u003c\/p\u003e\n\u003cp\u003eThese injectors are fitted in many makes - Audi, BMW, Chrysler, Ford, Mitsubishi, Siemens, Siemens Deka and VW.\u003cspan class=\"_Container_fkkky_1 _loadingIndicator_1x4zg_52 _ContainerInline_fkkky_15 _ContainerHidden_fkkky_19 _ContainerPaused_fkkky_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_fkkky_10\"\u003e\u003cspan class=\"_Dot_fkkky_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_fkkky_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_fkkky_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThere are many styles of this injector, please use the photos for reference.\u003c\/p\u003e\n\u003cp\u003eIf your Siemens \/ Siemens Deka injectors have elongated pintle ends and require a thinner seal at the bottom, please \u003cspan style=\"font-size: 0.875rem;\"\u003esearch 'Siemens Deka' and browse our kits containing those. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have the smaller Dekas, you may require the extra small filters, these can be found by searching '195202'.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cp\u003eSeal Kit 2\/S for 4 injectors, contained are:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4 x Upgraded all-metal filter baskets\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4 x 14.5mm OD Viton fuel rail seals\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e4 x 14.5mm OD Viton manifold seals\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTerms\u003c\/h4\u003e\n\u003cp\u003eAny injectors in the photos are for identification purposes. No injectors are included in the sale.\u003c\/p\u003e\n\u003cp\u003eAll kits and parts orders dispatched by Master Injector UK.\u003c\/p\u003e","brand":"Mr Injector UK","offers":[{"title":"Default Title","offer_id":40070521159753,"sku":"KIT2S","price":13.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/products\/kit2dekab.png?v=1669229755"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/0296\/5577\/collections\/kit_2_deka_b.png?v=1670516268","url":"https:\/\/www.mrinjectoruk.co.uk\/zh\/collections\/siemens.oembed?page=2","provider":"Mr Injector UK - Petrol Injector Servicing \u0026 Diagnostics","version":"1.0","type":"link"}