PETROL TEST FACILITY, NO DIESEL

1 2

Injector Overhaul Kit For Bosch D Jetronic 0280150023 6 Cylinder Mercedes & Jaguar - Kit 130

Injector Overhaul Kit For Bosch D Jetronic 0280150023 6 Cylinder Mercedes & Jaguar - Kit 130

289 skladem

£43.03 GBP
£43.03 GBP
Sleva Vyprodáno
Poštovné se vypočítá na pokladně.

Hose & Clip Kit for Bosch D-Jetronic 0280150023 Injectors – Kit 130

Kit 130 is for six-cylinder Mercedes and Jaguar applications fitted with Bosch D-Jetronic 0280150023 injectors. Confirm the injector part number and manifold seal size before ordering.

Its ethanol-resistant fuel hose lets you upgrade older polyester-reinforced injector hoses, helping futureproof your classic car as ethanol content in petrol rises and fuel blends change.

Check the inlet before ordering: This kit contains six 40 mm hose lengths and six hose clips. Compare your injector and rail connections with the product photos before ordering. The manifold seals supplied are 16 mm.

What’s included

  • 6 × 40 mm aramid-reinforced ethanol-resistant fuel hose lengths
  • 6 × hose clips matched to the supplied hose
  • 6 × mid-body injector clamping rubbers
  • 6 × injector filter baskets
  • 6 × pintle caps
  • 6 × 16 mm inlet manifold seals
  • Instruction sheets with fitting guidance

Fuel Hose specifications

  • Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid-fibre reinforcement and ECO rubber outer cover
  • Working pressure: 10 bar
  • Burst pressure: 50 bar
  • Temperature range: −40°C to +125°C (up to +150°C for short periods)
  • Standards listed: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007 and VW TL 524 24
  • Fuel compatibility: Ethanol-resistant and suitable for E10, biodiesel (RME) and commercially available fuels

Before you order

  • Confirm the injectors are Bosch D-Jetronic 0280150023 and that your application uses 16 mm manifold seals.
  • Check that the 40 mm hose lengths and clip arrangement match your installation.
  • The injector shown in the product photo is for identification only and is not included.

⚠️ Why you should check your old fuel hoses

UK fuel can contain up to 10% ethanol. Older polyester-reinforced fuel hoses can degrade over time, becoming hard, brittle or cracked. Leaks can occur, risking an engine fire. At the same time as replacing the injector hoses, it is advised to check the fuel feed and return lines and any other hoses around the engine, and replace any that are aged, cracked, hard, or unsuitable for current fuel.

All kits and parts orders dispatched by Master Injector UK.

Zobrazit veškeré podrobnosti

Because of the delicate nature of injectors, particularly historic hose ones, we advise using somebody competent in removing/installing the parts for you to prevent issues arising such as over-tightening of the hose clamps or damaging the pintle needles. Doing so yourself is at your own risk and we take no responsibility for damage resulting from poor handling or installation of parts.