Overhaul Parts Kit For Early Mercedes 6 Cylinder Fitted With Bosch 0280150036 Injectors - Kit 192

Overhaul Kit for Bosch 0280150036 Injectors in Early Mercedes Six-Cylinder Applications – Kit 192

Kit 192 is designed for early Mercedes six-cylinder applications fitted with Bosch 0280150036 fuel injectors. Check your injector numbers before ordering. It includes ethanol-resistant hoses and all the required replacement parts to refurbish six injectors at home, with instruction sheets to guide you through the work.

Its ethanol-resistant fuel hose lets you upgrade older polyester-reinforced injector hoses, helping futureproof your classic car as ethanol content in petrol rises and fuel blends change.

Check the inlet before ordering: this kit supplies twelve hose clips for six injector hoses, with clip fixing at both ends rather than ferrules. Compare your injector and rail connections with the product photos and confirm that your existing setup uses the same arrangement.

What’s included

• 6 × Aramid-reinforced, ethanol-resistant fuel hose pieces, cut to length
• 6 × mid-body clamping rubbers
• 6 × injector filter baskets
• 6 × inlet manifold seals
• 6 × pintle caps
• 12 × hose clips
• Instruction sheets to guide you through the work

Fuel Hose specifications

• Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid-fibre reinforcement and ECO rubber outer cover
• Working pressure: 10 bar
• Burst pressure: 50 bar
• Temperature range: −40°C to +125°C (up to +150°C for short periods)
• Standards listed: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007 and VW TL 524 24
• Fuel compatibility: Ethanol-resistant and suitable for E10, biodiesel (RME) and commercially available fuels

Before you order

• Confirm that your injectors are Bosch 0280150036 fitted in an early Mercedes six-cylinder application.
• Check that your existing hose connections use hose clips at both ends, in the same arrangement as this kit provides.
• The injector shown in the product photo is for identification only and is not included.

⚠️ Why you should check your old fuel hoses

UK fuel can contain up to 10% ethanol. Older polyester-reinforced fuel hoses can degrade over time, becoming hard, brittle or cracked. Leaks can occur, risking an engine fire. At the same time as replacing the injector hoses, it is advised to check the fuel feed and return lines and any other hoses around the engine, and replace any that are aged, cracked, hard, or unsuitable for current fuel.

All kits and parts orders dispatched by Master Injector UK.