PETROL TEST FACILITY, NO DIESEL

1 2

Hose & Clips Kit For Jaguar V12 Fitted With Bosch 0280150023 Injectors - Kit 87

Hose & Clips Kit For Jaguar V12 Fitted With Bosch 0280150023 Injectors - Kit 87

297 en stock

£42.60 GBP
£42.60 GBP
En vente Épuisé

This kit was designed with the Bosch 0280150023 injectors in your Jaguar V12 in mind.

These injectors have a single arrow headed inlet port, requiring hose clip fixing at both the injector and rail ends of the hose.

PLEASE SEE ADDITIONAL PICTURE TO IDENTIFY THE SINGLE ARROW HEADED INJECTOR INLET PIPE TYPE.

The kit contains 12 pieces of Aramid reinforced, ethanol-resistant fuel hose cut to exact length and hose clips, perfectly matched to the hose. These parts will allow you to upgrade the old polyester hoses on your injectors to futureproof your classic Jaguar.

Due to the rising ethanol levels in today's fuels, the old polyester hoses in your engine become hard and crack over time, causing leaks and unfortunately risking engine fires. We advise changing all old hoses around the engine to our Aramid reinforced fuel hose, not just the injector hoses but the feed and return lines too.

Our hose is 100% ethanol-resistant and is used in the aerospace and aviation industries.

Contents

Seal Kit 87 contains:

12 x Aramid reinforced, ethanol-resistant hose pieces cut to length

24 x Fuel line clips

Also included in all our hose kit orders are our instruction sheets with tips to help you complete the task.

Terms

The injector in the photo is not included in the sale, it is there to help you identify the kit.

****

About the Hose Included in This Kit

All Mr Injector UK kits use Cohline aramid-braided fuel hose — the same hose used in aerospace and aviation applications.

· Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid fibre reinforcement, ECO rubber outer cover

· Standard: DIN 73379-B1 (status 07/14)

· Also complies with: BMW GS 93010, DBL 6256.70, GME 08 007, SAE J30R9, VW TL 524 24

· Working pressure: 10 bar | Bursting pressure: 50 bar

· Temperature: -40°C to +125°C (up to +150°C for short periods)

· 100% ethanol resistant — suitable for E10 fuel, bio-diesel (RME), and all commercially available fuels

· Classic vehicle compatible

All kits and parts orders dispatched by Master Injector UK.

Afficher tous les détails

Because of the delicate nature of injectors, particularly historic hose ones, we advise using somebody competent in removing/installing the parts for you to prevent issues arising such as over-tightening of the hose clamps or damaging the pintle needles. Doing so yourself is at your own risk and we take no responsibility for damage resulting from poor handling or installation of parts.