PETROL TEST FACILITY, NO DIESEL
Seal Kit For Sagem Valeo Injectors 01F002A / 01F003A / 01F020A For Peugeot, Citroen & Triumph - Kit 8
Seal Kit For Sagem Valeo Injectors 01F002A / 01F003A / 01F020A For Peugeot, Citroen & Triumph - Kit 8
289 en stock
Impossible de charger la disponibilité du service de retrait
This kit was designed for Sagem injectors fitted to Peugeot, Citroen and Renault, identifiable by the Sagem logo on the side of the injector, also fits the Valeo injector as per the additional photo. Also compatible with Triumph 3 cylinder bikes, allowing you to keep one set back for future use.
They will have the numbers H001 / H002 / H003 / H004 printed on them, we have also had reports from customers that they're a perfect fit for their H006 injectors.
This kit will only fit the Sagem and Valeo injectors, not the Bosch or Weber ones.
The kit contains the upper and lower seals, no filters - this is because they cannot be removed/replaced in these injectors so please bear in mind when viewing kits sold elsewhere. Trying to remove these filters to install new ones will ruin your injectors.
For injectors:
01F002A / Valeo 348001 / 1984E0
01F003A / Valeo 348004 / 1984E2 / 75116328
01F004A / Valeo 348005 / 1984E4 / 9628084680
01F005A / Valeo 348006
01F006A / 1240891 / 01891 / T1240891 - from Triumph Tiger 885i
01F007A / 1240890 / Triumph T1240890
01F020A / 1240892 / Triumph T1240892
These injectors were fitted in many models, for example:
Peugeot 106, Peugeot 205, Peugeot 206 Hatchback, Peugeot 206, Peugeot 207, Peugeot Expert Box 222, Peugeot Expert 224, Peugeot Partner Van, Peugeot Partner Combispace, Peugeot 306, Peugeot 306 Estate, Peugeot 307, Peugeot 307 Estate, Peugeot 307 Break, Peugeot 405, Peugeot 406, Peugeot 406 Coupe, Peugeot 406 Break, Peugeot 407, Peugeot 607, Peugeot 806, Peugeot 807, Peugeot 1007 Hatchback, Peugeot Bipper
Citroen Berlingo, Citroen C2 Mk1, Citroen C3 Mk1, Citroen C3 Pluriel, Citroen Xsara, Citroen Xsara Estate, Citroen Xsara Coupe, Citroen Saxo Hatchback, Citroen ZX, Citroen C8
Triumph Sprint ST 955i, Tiger, Speed Triple 955, Daytona 955i
Please ensure your injectors match the numbers provided above or match the ones in the photos to ensure the seals will be compatible.
Contents
Seal Kit 8 contains:
4 x 14.5mm Viton top seals
4 x Viton lower seals
Terms
No injectors are included in the sale. The photos of injectors are for your identification purposes.
All kits and parts orders dispatched by Master Injector UK.
Share
⚠️ Petrol Compatibility & Injector Handling Notice
Petrol Only: Strictly for petrol engines, not diesel. Check compatibility before buying.
Delicate Mechanisms: Injectors—especially historic hose injectors—are fragile. Some components cannot be removed, replaced, or obtained anywhere. Check our kits before dismantling your own parts; some items are not available aftermarket. Do not force components loose or strip your injectors down until you know what we can replace, or the injector may need replacing.
Expert Fitment Advised: We strongly advise using a competent professional for installation to avoid common issues like over-tightening hose clamps or damaging pintle needles. If you are unsure about dismantling, fitting or refitting an injector, seek advice from a competent professional before proceeding.
Lubrication: The only lubricant we recommend is a light smear of clean engine oil, wiped almost completely off before fitting.