PETROL TEST FACILITY, NO DIESEL

1 2

Hose & Clip Kit For 6 Cylinder Engines Fitted With Early Bosch 0280150--- Injectors - Kit 91

Hose & Clip Kit For 6 Cylinder Engines Fitted With Early Bosch 0280150--- Injectors - Kit 91

299 disponibile/i

£22.80 GBP
£22.80 GBP
In offerta Esaurito

This kit was designed for your V6 and straight 6 engines fitted with Bosch 0280150 early series injectors, to suit very early Bosch EV1 L Jetronic type injectors with a single arrow headed inlet port, requiring hose clip clamping to the fuel rail and the injector (no ferrules).

CHECK REFER TO THE ADDITIONAL PHOTO TO IDENTIFY THE SINGLE ARROW HEADED INJECTOR INLET PIPE TYPE.

The kit contains our Aramid reinforced, ethanol-resistant fuel hose and hose clips, enabling you to upgrade your old polyester injector hoses at home, futureproofing your classic vehicle.

 

⚠️ Why You Must Replace Your Old Fuel Hoses Now

UK fuel now contains up to 10% ethanol. Older polyester-reinforced hoses are not ethanol-resistant — they degrade from the inside out, becoming brittle and prone to cracking. A leaking fuel hose near a hot engine is a fire risk.

Don’t just replace the injector hoses — check and replace all hoses from the tank to the feed and return lines.

 

Contents

Kit 91 contains:

6 x Aramid reinforced, ethanol-resistant hose pieces cut to your exact length — you are to specify the length

12 x Fuel line clips

 

Also included with every hose order are our instruction sheets, detailing how we recommend you take on the task.

 

Terms

The injector in the photo is not included in the sale, it is there to help you identify the kit.

 

About the Hose Included in This Kit

All Mr Injector UK kits use Cohline aramid-braided fuel hose — the same hose used in aerospace and aviation applications.

· Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid fibre reinforcement, ECO rubber outer cover

· Working pressure: 10 bar | Bursting pressure: 50 bar

· Temperature: -40°C to +125°C (up to +150°C for short periods)

· Meets multiple international standards: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007, VW TL 524 24 — providing superior resistance to degradation and fuel permeation compared to standard hoses

· 100% ethanol resistant — suitable for E10 fuel, bio-diesel (RME), and all commercially available fuels

· Classic vehicle compatible

 

All kits and parts orders dispatched by Master Injector UK.

Visualizza dettagli completi

Because of the delicate nature of injectors, particularly historic hose ones, we advise using somebody competent in removing/installing the parts for you to prevent issues arising such as over-tightening of the hose clamps or damaging the pintle needles. Doing so yourself is at your own risk and we take no responsibility for damage resulting from poor handling or installation of parts.