PETROL TEST FACILITY, NO DIESEL

1 3

Overhaul Service Kit For Jaguar Pre HE XJ12 XJS V12 With Bosch 0280150035 Lucas 73143B - Kit 105

Overhaul Service Kit For Jaguar Pre HE XJ12 XJS V12 With Bosch 0280150035 Lucas 73143B - Kit 105

242 i lager

£64.22 GBP
£64.22 GBP
Rea Slutsåld
Frakt beräknas i kassan.

Injector Overhaul Kit for Bosch and Lucas Injectors in Jaguar Pre-HE V12 – Kit 105

Kit 105 is designed for pre-HE Jaguar XJ12 and XJS V12 models fitted with Bosch 0280150035 or Lucas 73143B injectors. Check the injector numbers before ordering to confirm fitment.

Its ethanol-resistant fuel hose lets you upgrade older polyester-reinforced injector hoses, helping futureproof your classic car as ethanol content in petrol rises and fuel blends change.

Check the inlet before ordering: the standard fitment has a double-arrow inlet port on the injector and a single-arrow port at the fuel rail. Ferrules secure the hose to the injector, and hose clips secure it to the fuel rail.

What’s included

  • 12 × ethanol-resistant fuel hose lengths, cut to suit the application
  • 12 × hose ferrules for the standard Bosch 0280150035 / Lucas 73143B configuration
  • 12 × hose clips for the fuel-rail connections
  • 12 × injector filter baskets
  • 12 × inlet manifold seals
  • 12 × pintle caps
  • Instruction sheets to guide you through the work

For Bosch 0280150014 or 0280150023 injectors, the ferrules are exchanged for additional hose clips. Add a note at checkout if you need this alternate configuration.

Fuel Hose specifications

  • Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid-fibre reinforcement and ECO rubber outer cover
  • Working pressure: 10 bar
  • Burst pressure: 50 bar
  • Temperature range: −40°C to +125°C (up to +150°C for short periods)
  • Standards listed: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007 and VW TL 524 24
  • Fuel compatibility: Ethanol-resistant and suitable for E10, biodiesel (RME) and commercially available fuels

Before you order

  • Confirm your injector numbers are Bosch 0280150035 or Lucas 73143B for the standard ferrule-and-clip arrangement.
  • For Bosch 0280150014 or 0280150023, request the alternate ferrule-to-clip configuration in a checkout note.
  • Injectors are not included; any injector shown is for identification only.

⚠️ Why you should check your old fuel hoses

UK fuel can contain up to 10% ethanol. Older polyester-reinforced fuel hoses can degrade over time, becoming hard, brittle or cracked. Leaks can occur, risking an engine fire. At the same time as replacing the injector hoses, it is advised to check the fuel feed and return lines and any other hoses around the engine, and replace any that are aged, cracked, hard, or unsuitable for current fuel.

All kits and parts orders dispatched by Master Injector UK.

Visa alla uppgifter

⚠️ Petrol Compatibility & Injector Handling Notice

Petrol Only: Strictly for petrol engines, not diesel. Check compatibility before buying.

Delicate Mechanisms: Injectors—especially historic hose injectors—are fragile. Some components cannot be removed, replaced, or obtained anywhere. Check our kits before dismantling your own parts; some items are not available aftermarket. Do not force components loose or strip your injectors down until you know what we can replace, or the injector may need replacing.

Expert Fitment Advised: We strongly advise using a competent professional for installation to avoid common issues like over-tightening hose clamps or damaging pintle needles. If you are unsure about dismantling, fitting or refitting an injector, seek advice from a competent professional before proceeding.

Lubrication: The only lubricant we recommend is a light smear of clean engine oil, wiped almost completely off before fitting.