PETROL TEST FACILITY, NO DIESEL

1 2

Hose, Clip & Ferrule Kit For 4 Cylinder Engines Fitted With Bosch 0280150--- Injectors - Kit 93

Hose, Clip & Ferrule Kit For 4 Cylinder Engines Fitted With Bosch 0280150--- Injectors - Kit 93

有 49 件庫存

£17.20 GBP
£17.20 GBP
特價 售罄

This kit was designed for your V4 or straight 4 engine fitted with Bosch 0280150 EV1 series injectors, to suit early series L Jetronic injectors with a double arrow headed inlet port, requiring ferrule fix to the injector and hose clip fix to the fuel rail.

PLEASE REFER TO THE ADDITIONAL PICTURE TO IDENTIFY THE DOUBLE ARROW HEADED INJECTOR INLET PIPE TYPE.

The kit contains our ethanol-resistant fuel hose, ferrules and clips to enable you to upgrade your old polyester injector hoses at home, futureproofing your classic vehicle.

 

⚠️ Why You Must Replace Your Old Fuel Hoses Now

UK fuel now contains up to 10% ethanol. Older polyester-reinforced hoses are not ethanol-resistant — they degrade from the inside out, becoming brittle and prone to cracking. A leaking fuel hose near a hot engine is a fire risk.

Don’t just replace the injector hoses — check and replace all hoses from the tank to the feed and return lines.

 

Contents

Seal Kit 93 contains:

4 x Aramid reinforced, ethanol-resistant hose cut to your exact length — you are to specify the length required

4 x Hose ferrules

4 x Hose clips

 

Also included with every hose order are our instruction sheets, detailing how we recommend you take on the task.

 

Terms

The injector in the photo is not included in the sale, it is there to help you identify the kit.

 

About the Hose Included in This Kit

All Mr Injector UK kits use Cohline aramid-braided fuel hose — the same hose used in aerospace and aviation applications.

· Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid fibre reinforcement, ECO rubber outer cover

· Working pressure: 10 bar | Bursting pressure: 50 bar

· Temperature: -40°C to +125°C (up to +150°C for short periods)

· Meets multiple international standards: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007, VW TL 524 24 — providing superior resistance to degradation and fuel permeation compared to standard hoses

· 100% ethanol resistant — suitable for E10 fuel, bio-diesel (RME), and all commercially available fuels

· Classic vehicle compatible

 

All kits and parts orders dispatched by Master Injector UK.

查看完整資訊

Because of the delicate nature of injectors, particularly historic hose ones, we advise using somebody competent in removing/installing the parts for you to prevent issues arising such as over-tightening of the hose clamps or damaging the pintle needles. Doing so yourself is at your own risk and we take no responsibility for damage resulting from poor handling or installation of parts.