PETROL TEST FACILITY, NO DIESEL
Parts Kit For Bosch EV6 & Denso Injectors Featuring Stepped Pintle Retainers 6 Cylinders V6 - Kit 23
Parts Kit For Bosch EV6 & Denso Injectors Featuring Stepped Pintle Retainers 6 Cylinders V6 - Kit 23
298 in stock
Couldn't load pickup availability
This kit was designed for Bosch EV6 injectors 0280155--- and 0280156--- for V6 Jaguar / Ford requiring the thicker / stepped pintle washer type.
Contained are the filter baskets, Viton seals and stepped pintle retainers.
We stock kits containing the flat/thin-lipped, fluted and stepped pintle retainers, you can find these by searching for 'pintle retainer'.
Contents
The Kit 23 contains:
6 x Filter baskets
6 x Top Viton 14.5mm od seals
6 x Bottom Viton 14.5mm od seals
6 x Stepped pintle retainers
Terms
The injector in the photo is for identification purposes, no injectors are included in the sale. All parts equal to or exceed the specifications of what was originally installed on your injectors. All kits and parts orders dispatched by Master Injector UK.
Share
⚠️ Petrol Compatibility & Injector Handling Notice
Petrol Only: Strictly for petrol engines, not diesel. Check compatibility before buying.
Delicate Mechanisms: Injectors—especially historic hose injectors—are fragile. Some components cannot be removed, replaced, or obtained anywhere. Check our kits before dismantling your own parts; some items are not available aftermarket. Do not force components loose or strip your injectors down until you know what we can replace, or the injector may need replacing.
Expert Fitment Advised: We strongly advise using a competent professional for installation to avoid common issues like over-tightening hose clamps or damaging pintle needles. If you are unsure about dismantling, fitting or refitting an injector, seek advice from a competent professional before proceeding.
Lubrication: The only lubricant we recommend is a light smear of clean engine oil, wiped almost completely off before fitting.