Hose, Ferrule & Clip Kit For Land Rover / Range Rover V8 3.5L With Bosch 0280150105 - Kit 88

Hose, Ferrule & Clip Kit for Bosch 0280150105 and Lucas 73178A Injectors – Kit 88

This kit is compatible with Bosch 0280150105 and Lucas 73178A injectors fitted to 3.5L V8 Land Rover and Range Rover vehicles. It contains 8 pieces of aramid-reinforced, ethanol-resistant fuel hose cut to the exact length, 8 matching fuel line clips and 8 hose ferrules.

Its ethanol-resistant fuel hose lets you upgrade older polyester-reinforced injector hoses, helping futureproof your classic vehicle as ethanol content in petrol rises and fuel blends change.

Check the inlet before ordering: this kit is designed for very early Bosch EV1 L-Jetronic-type injectors with a double arrow-headed inlet port. Please compare yours with the additional product photo. Ferrules secure the hose at the injector end, and clips secure it at the fuel rail end.

What’s included

• 8 pieces of aramid-reinforced, ethanol-resistant fuel hose, cut to the exact length
• 8 hose ferrules, for fitting at the injector end
• 8 fuel line clips, matched to the hose for fitting at the fuel rail end

Instruction sheets with fitting tips are also included.

Fuel Hose specifications

• Construction: Cohline FPM inner tube, ECO rubber intermediate layer, braided aramid-fibre reinforcement and ECO rubber outer cover
• Pressure: 10 bar working pressure; 50 bar burst pressure
• Temperature range: -40°C to +125°C, up to +150°C for short periods
• Standards listed: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007 and VW TL 524 24
• Fuel compatibility: 100% ethanol-resistant; suitable for E10, biodiesel (RME) and all commercially available fuels

Before you order

• Confirm your injector is Bosch 0280150105 or Lucas 73178A and has the double arrow-headed inlet shown in the additional product photo.
• This kit uses a ferrule at the injector end and a clip at the fuel rail end.
• The injector shown in the photo is for identification only and is not included.

⚠️ Why you should check your old fuel hoses

UK fuel can contain up to 10% ethanol. Older polyester-reinforced fuel hoses can degrade over time, becoming hard, brittle or cracked. Leaks can occur, risking an engine fire. At the same time as replacing the injector hoses, it is advised to check the fuel feed and return lines and any other hoses around the engine, and replace any that are aged, cracked, hard, or unsuitable for current fuel.

All kits and parts orders dispatched by Master Injector UK.