Jecs Bosch Compatible Early Series Hose To Rail Injector Overhaul Kit 4 Cylinders - Kit 134

Designed for JECS / Bosch Early series injectors with hose to rail fitting.

This is for 4 cylinder engines with a ferrule fitting to the injector and a clip fit to the fuel rail.

Contents

Kit 134 contains:

4 x Aramid hose pcs 50mm in length (longer or shorter if you require, up to 65mm inc in price)

4 x Hose clips perfectly matched to the hose

4 x Injector ferrules

4 x Mid-body clamping rubbers

4 x Filter baskets

4 x Pintle caps long type

4 x Inlet manifold seals

Also included in all hose kit orders are our instruction sheets to help with the task.

Terms

The photo of the injector is there for identification purposes, no injectors are included in the sale. 

Use this kit to replace your old polyester reinforced rubber fuel feed pipe because, over time, if you do not it could unfortunately leak or cause engine fires. The hose is ethanol resistant 100% and is used by the aerospace and aviation industries.

This hose is expensive, but it is the correct hose to use. Using any other type of high-pressure hose could compromise your classic vehicle.

Aramid is the only hose to use now; new levels of ethanol present in fuels in the UK will slowly eat your old type polyester reinforced hose with disastrous consequences.

There is at present some 10% ethanol in UK fuels, set to rise each year, and 25% present in some European countries & rest of the world.

You cannot afford not to change the fuel line hoses on your injectors.

All parts are tried, tested and manufactured for Mr Injector UK. All parts equal to or exceed specifications of what was originally installed on your injectors in material and function.