PETROL TEST FACILITY, NO DIESEL
Viton Seal Kit For Denso Sard Top Feed Injectors 6 Cylinders - Kit 45
Viton Seal Kit For Denso Sard Top Feed Injectors 6 Cylinders - Kit 45
299 på lager
Tilgængelighed for afhentning kunne ikke indlæses
Specifically developed for Nissan and Toyota fitted with Denso and Sard top-feed fuel injectors — this kit contains all three seal positions in Viton, allowing you to refurbish your 6-cylinder injectors at home.
Available in 13.6mm or 16mm OD manifold seals — leave a note at checkout if you need the smaller size, otherwise 16mm OD will be included by default.
Contents
Kit 45 contains:
6 × Viton top fuel rail seals
6 × Viton dust spacer seals
6 × Viton manifold seals — 13.6mm or 16mm OD
Seal Material
Viton (FKM) — fuel-resistant and temperature-stable for long service life.
Terms
No injectors are included in the sale. All kit and parts orders are dispatched by Master Injector UK.
Share
⚠️ Petrol Compatibility & Injector Handling Notice
Petrol Only: Strictly for petrol engines, not diesel. Check compatibility before buying.
Delicate Mechanisms: Injectors—especially historic hose injectors—are fragile. Some components cannot be removed, replaced, or obtained anywhere. Check our kits before dismantling your own parts; some items are not available aftermarket. Do not force components loose or strip your injectors down until you know what we can replace, or the injector may need replacing.
Expert Fitment Advised: We strongly advise using a competent professional for installation to avoid common issues like over-tightening hose clamps or damaging pintle needles. If you are unsure about dismantling, fitting or refitting an injector, seek advice from a competent professional before proceeding.
Lubrication: The only lubricant we recommend is a light smear of clean engine oil, wiped almost completely off before fitting.