Gå til produktoplysninger
1 af 2

Bosch EV1 D Jetronic series 0280150--- Compatible Fuel Injector Hose & Clips 4 Cylinder Kit - Kit 94

Bosch EV1 D Jetronic series 0280150--- Compatible Fuel Injector Hose & Clips 4 Cylinder Kit - Kit 94

300 på lager

Normalpris £11.90 GBP
Normalpris Udsalgspris £11.90 GBP
Udsalg Udsolgt

This kit was designed to suit very early series Bosch EV1 D Jetronic type injectors with a single arrow headed inlet port, requiring hose clip clamping and not the double arrow headed ferrule fixing.

Please refer to the additional photo to identify the single arrow headed inlet pipe type.


Contents

Kit 94 contains:

4 x Pieces of Aramid reinforced hose cut to your requirement (up to 52mm in length each), longer hose available at additional cost if required

8 x Fuel line clips matched perfectly to our hose

 

Terms

These are exacting items; the hose and clip combination have been perfectly matched to the original injector parts. The hose is ethanol resistant 100% and is used by the aerospace and aviation industries. Use this kit to replace your old polyester reinforced rubber fuel feed pipe because, over time, if you do not it could unfortunately leak or cause engine fires. This hose is expensive, but it is the correct hose to use, using any other type of high-pressure fuel hose could compromise your classic vehicle. Aramid is the only hose to use now; new levels of ethanol present in fuels in the UK will slowly eat your old type polyester reinforced hose with disastrous consequences. There is at present some 10% ethanol in UK fuels, set to rise each year, and 25% present in some European countries and the rest of the world. You cannot afford not to change the fuel line hoses on your injectors.

All kits and parts orders dispatched by Master Injector UK.

Se komplette oplysninger