High Pressure Fuel Injector Hose German-Made Ethanol-Resistant 7.3mm ID x 13.5mm OD x 1 Metre

German-Manufactured Aramid-Braided Fuel Hose — 7.3mm ID, Sold Per Metre

The same hose used in aerospace and aviation applications. This German-manufactured aramid-braided fuel hose is the only correct replacement for polyester-reinforced hoses on classic and modern fuel-injected engines. 100% ethanol-resistant and fully compatible with E10, bio-diesel (RME), and all commercially available fuels.

⚠️ Why You Must Replace Your Old Fuel Hoses Now

UK fuel now contains up to 10% ethanol. Older polyester-reinforced hoses are not ethanol-resistant — they degrade from the inside out, becoming brittle and prone to cracking. A leaking fuel hose near a hot engine is a fire risk.

Don’t just replace the injector hoses — check and replace all hoses from the tank to the feed and return lines.

Construction

Multi-layer design engineered for high-pressure fuel systems:

· FPM (fluoro elastomer) rubber inner tube — chemical resistance and high-temperature performance

· ECO (epichlorohydrin) rubber intermediate layer — oil resistance and heat stability

· Braided aramid fibre reinforcement — exceptional tensile strength, pressure resistance and flexibility

· ECO rubber outer cover — resistance to weathering, ozone and oils

Technical Specifications

· Internal diameter: 7.3mm | External diameter: 13.5mm

· Working pressure: 10 bar | Bursting pressure: 50 bar | Testing pressure: 20 bar

· Minimum bending radius: 60mm

· Temperature range: -40°C to +125°C (up to +150°C for short periods)

· Meets multiple international standards: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007, VW TL 524 24 — providing superior resistance to degradation and fuel permeation compared to standard hoses

Sold Per Metre

This hose is sold in lengths of 1 metre. If you require 2 metres, increase the quantity to 2, and so on.

Complete the Kit

· 12-14mm High Pressure Fuel Hose Clips — the correct clip size for this hose (10 Pack)

Also Available In

We stock this hose in three sizes to allow you to replace all hoses around the engine, including feed and return lines:

· 9.3mm ID x 15.3mm OD — sold per 0.5 metre

· 11.5mm ID x 18.5mm OD — sold per 250mm

All kits and parts orders dispatched by Master Injector UK.